rate and parse checksums - Dpkg::Compression::Process: wrapper around compression tools - Dpkg::Compression::FileHandle: transparently (de)compress files - Dpkg::Conf: parse dpkg configuration files - Dpkg::Control: parse and manipulate Debian control information (.dsc, .changes, Packages/Sources entries, etc.) - Dpkg::Deps: parse and manipulate dependencies - Dpkg::Exit: push, pop and run exit handlers - Dpkg::Gettext: wrapper around Locale::gettext - Dpkg::IPC: spawn sub-processes and feed/retrieve data - Dpkg::Index: collections of Dpkg::Control (Packages/Sources files for example) - Dpkg::Interface::Storable: base object serializer - Dpkg::Path: common path handling functions - Dpkg::Source::Package: extract Debian source packages - Dpkg::Substvars: substitute variables in strings - Dpkg::Vendor: identify current distribution vendor - Dpkg::Version: parse and manipulate Debian package versions . All the packages listed in Suggests or Recommends are used by some of the modules. Homepage: https://wiki.debian.org/Teams/Dpkg Package: ntp Status: install ok installed Priority: optional Section: net Installed-Size: 1245 Maintainer: Debian NTP Team Architecture: amd64 Version: 1:4.2.6.p5+dfsg-7+deb8u1 Depends: adduser, lsb-base (>= 3.2-13), netbase, libc6 (>= 2.17), libcap2 (>= 1:2.10), libedit2 (>= 2.11-20080614), libopts25 (>= 1:5.18.4), libssl1.0.0 (>= 1.0.0) Pre-Depends: dpkg (>= 1.15.7.2) Recommends: perl Suggests: ntp-doc Breaks: dhcp3-client (<< 4.1.0-1) Conffiles: /etc/cron.daily/ntp af4becca9dde009fc606dae1575cf551 /etc/default/ntp cd7a62fbb18fa8fe5893dee93064b328 /etc/dhcp/dhclient-exit-hooks.d/ntp fbc234ecd0f7e8bc1c394bbde5867be1 /etc/init.d/ntp 1593209e2edaef7930940759b07caee1 /etc/ntp.conf 3e250ecaf470e1d3a2b68edd5de46bfd Description: Network Time Protocol daemon and utility programs NTP, the Network Time Protocol, is used to keep computer clocks accurate by synchronizing them over the Internet or a local network, or by following an accurate hardware receiver that interprets GPS, DCF-77, NIST or similar time signals. . This package contains the NTP daemon and utility programs. An NTP daemon needs to be running on each host that is to have its clock accuracy controlled by NTP. The same NTP daemon is also used to provide NTP service to other hosts. . For more information about the NTP protocol and NTP server configuration and operation, install the package "ntp-doc". Homepage: http://support.ntp.org/ Package: libpsl0 Status: install ok installed Priority: optional Section: libs Installed-Size: 510 Maintainer: Tim Rühsen Architecture: amd64 Multi-Arch: same Source: libpsl Version: 0.5.1-1 Depends: libc6 (>= 2.8), libicu52 (>= 52~m1-1~) Description: Library for Public Suffix List (shared libraries) Libpsl allows checking domains against the Public Suffix List, It can be used to avoid privacy-leaking 'super-cookies', 'super domain' certificates, for domain highlighting purposes sorting domain lists by site and more. . This package contains runtime libraries. Homepage: https://github.com/rockdaboot/libpsl Package: whois Status: install ok installed Priority: standard Section: net Installed-Size: 209 Maintainer: Marco d'Itri Architecture: amd64 Version: 5.2.7 Depends: libc6 (>= 2.15), libidn11 (>= 1.13) Description: intelligent WHOIS client This package provides a commandline client for the WHOIS (RFC 3912) protocol, which queries online servers for information such as contact details for domains and IP address assignments. It can intelligently select the appropriate WHOIS server for most queries. . The package also contains mkpasswd, a features-rich front end to the password encryption function crypt(3). Package: libc6 Status: install ok installed Priority: required Section: libs Installed-Size: 10223 Maintainer: GNU Libc Maintainers Architecture: amd64 Multi-Arch: same Source: glibc Version: 2.19-18+deb8u1 Replaces: libc6-amd64 Depends: libgcc1 Suggests: glibc-doc, debconf | debconf-2.0, locales Breaks: hurd (<< 1:0.5.git20140203-1), libtirpc1 (<< 0.2.3), locales (<< 2.19), locales-all (<< 2.19), lsb-core (<= 3.2-27), nscd (<< 2.19) Conflicts: prelink (<= 0.0.20090311-1), tzdata (<< 2007k-1), tzdata-etch Conffiles: /etc/ld.so.conf.d/x86_64-linux-gnu.conf 593ad12389ab2b6f952e7ede67b8fbbf Description: GNU C Library: Shared libraries Contains the standard libraries that are used by nearly all programs on the system. This package includes shared versions of the standard C library and the standard math library, as well as many others. Homepage: http://www.gnu.org/software/libc/libc.html Package: netcat-traditional Status: install ok installed Priority: important Section: net Installed-Size: 157 Maintainer: Ruben Molina Architecture: amd64 Source: netcat Version: 1.10-41 Provides: netcat Depends: libc6 (>= 2.15) Description: TCP/IP swiss army knife A simple Unix utility which reads and writes data across network connections using TCP or UDP protocol. It is designed to be a reliable "back-end" tool that can be used directly or easily driven by other programs and scripts. At the same time it is a feature-rich network debugging and exploration tool, since it can create almost any kind of connection you would need and has several interesting built-in capabilities. . This is the "classic" netcat, written by *Hobbit*. It lacks many features found in netcat-openbsd. Package: libprocps3 Status: install ok installed Priority: important Section: libs Installed-Size: 132 Maintainer: Craig Small Architecture: amd64 Multi-Arch: same Source: procps Version: 2:3.3.9-9 Replaces: procps (<< 1:3.3.2-1) Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: library for accessing process information from /proc The libprocps library is a way of accessing information out of the /proc filesystem. . This package contains the shared libraries necessary to run programs compilied with libprocps. Homepage: http://gitorious.org/procps Package: python2.7 Status: install ok installed Priority: standard Section: python Installed-Size: 293 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: allowed Version: 2.7.9-2 Replaces: python-profiler (<= 2.7.1-2), python2.7-minimal (<< 2.7.3-7~) Depends: python2.7-minimal (= 2.7.9-2), libpython2.7-stdlib (= 2.7.9-2), mime-support Suggests: python2.7-doc, binutils Breaks: python-virtualenv (<< 1.7.1.2-2~), vim-athena (<< 2:7.3.547-4), vim-gnome (<< 2:7.3.547-4), vim-gtk (<< 2:7.3.547-4), vim-nox (<< 2:7.3.547-4) Conflicts: python-profiler (<= 2.7.1-2) Description: Interactive high-level object-oriented language (version 2.7) Python is a high-level, interactive, object-oriented language. Its 2.7 version includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. Package: mlocate Status: install ok installed Priority: standard Section: utils Installed-Size: 723 Maintainer: Tollef Fog Heen Architecture: amd64 Version: 0.26-1 Depends: libc6 (>= 2.14), adduser Conflicts: findutils (<= 4.2.31-1), slocate (<= 3.1-1.1) Conffiles: /etc/updatedb.conf 120f1b50c0c23bd19beca8c908812987 /etc/cron.daily/mlocate 291e65d49accbae517e68bf8478dbc6f Description: quickly find files on the filesystem based on their name mlocate is a new implementation of locate, a tool to find files anywhere in the filesystem based on their name, using a fixed pattern or a regular expression. Unlike other tools like find(1), locate uses a previously created database to perform the search, allowing queries to execute much faster. This database is updated periodically from cron. . Several implementations of locate exist: the original implementation from GNU's findutils, slocate, and mlocate. The advantages of mlocate are: . * it indexes all the filesystem, but results of a search will only include files that the user running locate has access to. It does this by updating the database as root, but making it unreadable for normal users, who can only access it via the locate binary. slocate does this as well, but not the original locate. . * instead of re-reading all the contents of all directories each time the database is updated, mlocate keeps timestamp information in its database and can know if the contents of a directory changed without reading them again. This makes updates much faster and less demanding on the hard drive. This feature is only found in mlocate. . Installing mlocate will change the /usr/bin/locate binary to point to mlocate via the alternatives mechanism. After installation, you may wish to run /etc/cron.daily/mlocate by hand to create the database, otherwise mlocate won't work until that script is run from cron itself (since mlocate does not use the same database file as standard locate). Also, you may wish to remove the "locate" package in order not to have two different database files updated regularly on your system. Homepage: http://carolina.mff.cuni.cz/~trmac/blog/mlocate Package: libgd3 Status: install ok installed Priority: optional Section: libs Installed-Size: 498 Maintainer: GD team Architecture: amd64 Multi-Arch: same Source: libgd2 Version: 2.1.0-5 Depends: libc6 (>= 2.14), libfontconfig1 (>= 2.11), libfreetype6 (>= 2.2.1), libjpeg62-turbo (>= 1.3.1), libpng12-0 (>= 1.2.13-4), libtiff5 (>= 4.0.3), libvpx1 (>= 1.0.0), libx11-6, libxpm4, zlib1g (>= 1:1.1.4) Pre-Depends: multiarch-support Suggests: libgd-tools Description: GD Graphics Library GD is a graphics library. It allows your code to quickly draw images complete with lines, arcs, text, multiple colours, cut and paste from other images, flood fills, and write out the result as a PNG file. This is particularly useful in World Wide Web applications, where PNG is one of the formats accepted for inline images by most browsers. . This is the runtime package of the library. Homepage: http://www.libgd.org/ Package: libgc1c2 Status: install ok installed Priority: standard Section: libs Installed-Size: 253 Maintainer: Christoph Egger Architecture: amd64 Multi-Arch: same Source: libgc Version: 1:7.2d-6.4 Replaces: libgc1, libgc1c3 Depends: libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1) Pre-Depends: multiarch-support Conflicts: libgc1 Description: conservative garbage collector for C and C++ Boehm-Demers-Weiser's GC is a garbage collecting storage allocator that is intended to be used as a plug-in replacement for C's malloc or C++'s new(). . It allows you to allocate memory basically as you normally would without explicitly deallocating memory that is no longer useful. The collector automatically recycles memory when it determines that it can no longer be used. . This version of the collector is thread safe, has C++ support and uses the defaults for everything else. However, it does not work as a drop-in malloc(3) replacement. Homepage: http://www.hpl.hp.com/personal/Hans_Boehm/gc/ Package: libboost-iostreams1.55.0 Status: install ok installed Priority: important Section: libs Installed-Size: 164 Maintainer: Debian Boost Team Architecture: amd64 Multi-Arch: same Source: boost1.55 Version: 1.55.0+dfsg-3 Depends: libbz2-1.0, libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.2.1), zlib1g (>= 1:1.1.4) Pre-Depends: multiarch-support Description: Boost.Iostreams Library This package forms part of the Boost C++ Libraries collection. . Boost.Iostreams are a collection of concepts and a set of templates which turn models of these concepts into C++ standard library streams and stream buffers. Homepage: http://www.boost.org/libs/iostreams/ Package: discover-data Status: install ok installed Priority: optional Section: libs Installed-Size: 4392 Maintainer: Debian Install System Team Architecture: all Version: 2.2013.01.11 Recommends: pciutils (>= 1:2.2.4) Conflicts: libdiscover2 (<< 2.0.4-4) Description: Data lists for Discover hardware detection system The Discover hardware detection library uses XML data files to describe software interfaces to various ATA, PCI, PMCMIA, SCSI, and USB devices. While the Discover library can retrieve data from anywhere on the net, it is often convenient to have a set of Discover XML data files on one's system; thus, this package. Package: libqdbm14 Status: install ok installed Priority: optional Section: libs Installed-Size: 330 Maintainer: KURASHIKI Satoru Architecture: amd64 Source: qdbm (1.8.78-5) Version: 1.8.78-5+b1 Depends: libc6 (>= 2.2.5), zlib1g (>= 1:1.1.4) Description: QDBM Database Libraries without GDBM wrapper[runtime] QDBM is an embeded database library compatible with GDBM and NDBM. It features hash database and B+ tree database and is developed referring to GDBM for the purpose of the following three points: higher processing speed, smaller size of a database file, and simpler API. This is the runtime package for programs that use the QDBM database library. Homepage: http://fallabs.com/qdbm/ Package: libtext-soundex-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 89 Maintainer: Debian Perl Group Architecture: amd64 Source: libtext-soundex-perl (3.4-1) Version: 3.4-1+b2 Depends: perl (>= 5.20.0-4), perlapi-5.20.0, libc6 (>= 2.4) Description: implementation of the soundex algorithm Text::Soundex implements the original soundex algorithm developed by Robert Russell and Margaret Odell, patented in 1918 and 1922, as well as a variation called "American Soundex" used for US census data, and current maintained by the National Archives and Records Administration (NARA). Homepage: https://metacpan.org/release/Text-Soundex/ Package: task-ssh-server Status: install ok installed Priority: optional Section: tasks Installed-Size: 21 Maintainer: Debian Install System Team Architecture: all Source: tasksel Version: 3.31+deb8u1 Depends: tasksel (= 3.31+deb8u1), openssh-server Recommends: openssh-client Description: SSH server This task sets up your system to be remotely accessed through SSH connections. Package: startpar Status: install ok installed Priority: required Section: admin Installed-Size: 95 Maintainer: Debian sysvinit maintainers Architecture: amd64 Version: 0.59-3 Replaces: sysvinit-utils (<< 2.88dsf-52) Depends: libc6 (>= 2.15) Suggests: insserv, sysv-rc Breaks: sysvinit-utils (<< 2.88dsf-52) Conffiles: /etc/init/startpar-bridge.conf 152b77b1904939b461edc251844d0008 Description: run processes in parallel and multiplex their output Used by the sysv-rc boot system executor to run init.d scripts in parallel while making sure the script output is not completely messed up. Homepage: http://savannah.nongnu.org/projects/sysvinit Package: libtiff5 Status: install ok installed Priority: optional Section: libs Installed-Size: 593 Maintainer: Jay Berkenbilt Architecture: amd64 Multi-Arch: same Source: tiff Version: 4.0.3-12.3 Depends: libc6 (>= 2.14), libjbig0 (>= 2.0), libjpeg62-turbo (>= 1.3.1), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.1.4) Pre-Depends: multiarch-support Description: Tag Image File Format (TIFF) library libtiff is a library providing support for the Tag Image File Format (TIFF), a widely used format for storing image data. This package includes the shared library. Homepage: http://libtiff.maptools.org Package: libirs-export91 Status: install ok installed Priority: optional Section: libs Installed-Size: 100 Maintainer: LaMont Jones Architecture: amd64 Source: bind9 Version: 1:9.9.5.dfsg-9+deb8u3 Depends: libc6 (>= 2.14), libdns-export100, libisc-export95, libisccfg-export90 Pre-Depends: multiarch-support Description: Exported IRS Shared Library The Berkeley Internet Name Domain (BIND) implements an Internet domain name server. BIND is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package delivers the exported libirs shared library. Package: gettext-base Status: install ok installed Priority: standard Section: utils Installed-Size: 965 Maintainer: Santiago Vila Architecture: amd64 Multi-Arch: foreign Source: gettext Version: 0.19.3-2 Depends: libc6 (>= 2.14), libasprintf0c2 (>= 0.18.1.1-6) Description: GNU Internationalization utilities for the base system This package includes the gettext and ngettext programs which allow other packages to internationalize the messages given by shell scripts. Homepage: http://www.gnu.org/software/gettext/ Package: ssl-cert Status: install ok installed Priority: optional Section: utils Installed-Size: 102 Maintainer: Debian Apache Maintainers Architecture: all Multi-Arch: foreign Version: 1.0.35 Depends: debconf (>= 0.5) | debconf-2.0, openssl (>= 0.9.8g-9), adduser Suggests: openssl-blacklist Description: simple debconf wrapper for OpenSSL This package enables unattended installs of packages that need to create SSL certificates. . It is a simple wrapper for OpenSSL's certificate request utility that feeds it with the correct user variables. Package: libhttp-daemon-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 71 Maintainer: Debian Perl Group Architecture: all Version: 6.01-1 Replaces: libwww-perl (<< 6.00) Depends: perl, libhttp-date-perl, libhttp-message-perl, liblwp-mediatypes-perl Breaks: libwww-perl (<< 6.00) Description: simple http server class Instances of the HTTP::Daemon class are HTTP/1.1 servers that listen on a socket for incoming requests. The HTTP::Daemon is a subclass of IO::Socket::INET, so you can perform socket operations directly on it too. . The accept() method will return when a connection from a client is available. The returned value will be an HTTP::Daemon::ClientConn object which is another IO::Socket::INET subclass. Calling the get_request() method on this object will read data from the client and return an HTTP::Request object. The ClientConn object also provide methods to send back various responses. . This HTTP daemon does not fork(2) for you. Your application, i.e. the user of the HTTP::Daemon is responsible for forking if that is desirable. Also note that the user is responsible for generating responses that conform to the HTTP/1.1 protocol. Homepage: http://search.cpan.org/dist/HTTP-Daemon/ Package: libpipeline1 Status: install ok installed Priority: important Section: libs Installed-Size: 63 Maintainer: Colin Watson Architecture: amd64 Multi-Arch: same Source: libpipeline Version: 1.4.0-1 Depends: libc6 (>= 2.15) Pre-Depends: multiarch-support Description: pipeline manipulation library This is a C library for setting up and running pipelines of processes, without needing to involve shell command-line parsing which is often error-prone and insecure. Homepage: http://libpipeline.nongnu.org/ Package: libpgm-5.1-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 301 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Source: libpgm Version: 5.1.118-1~dfsg-1 Depends: libc6 (>= 2.17) Description: OpenPGM shared library OpenPGM is an open source implementation of the Pragmatic General Multicast (PGM) specification in RFC 3208 available at www.ietf.org. PGM is a reliable and scalable multicast protocol that enables receivers to detect loss, request retransmission of lost data, or notify an application of unrecoverable loss. PGM is a receiver-reliable protocol, which means the receiver is responsible for ensuring all data is received, absolving the sender of reception responsibility. PGM runs over a best effort datagram service, currently OpenPGM uses IP multicast but could be implemented above switched fabrics such as InfiniBand. . This is the runtime package for programs that use the OpenPGM library. Homepage: http://code.google.com/p/openpgm/ Package: initramfs-tools Status: install ok installed Priority: optional Section: utils Installed-Size: 342 Maintainer: Debian kernel team Architecture: all Multi-Arch: foreign Version: 0.120 Provides: linux-initramfs-tool Depends: klibc-utils (>= 2.0-1~), cpio, kmod | module-init-tools, udev, klibc-utils (>= 2.0.4-1.2~) | busybox (>= 1:1.01-3) | busybox-initramfs | busybox-static Recommends: busybox (>= 1:1.01-3) | busybox-initramfs | busybox-static Suggests: bash-completion Breaks: console-setup (<< 1.72), cryptsetup (<< 2:1.6.6-4~), elilo (<< 3.12-3.1~), lilo (<< 22.8-8.2~), lvm2 (<< 2.02.111-2.1~), s390-tools (<< 1.8.3-2~), systemd-sysv (<< 186) Conflicts: linux-initramfs-tool, usplash (<< 0.5.50) Conffiles: /etc/bash_completion.d/initramfs-tools 7eeb7184772f3658e7cf446945c096b1 /etc/initramfs-tools/initramfs.conf 42161705437308c44abc6d46395889c1 /etc/initramfs-tools/update-initramfs.conf e2026d4603e7161efaccca519aeb1297 /etc/kernel/postinst.d/initramfs-tools 1d77d3e4b57c3da299aacd44b1dc207c /etc/kernel/postrm.d/initramfs-tools f57d0b03f79fd46dd1a1fa3b00206070 Description: generic modular initramfs generator This package contains tools to create a bootable initramfs for Linux kernel packages. The initramfs is a compressed cpio archive. At boot time, the kernel unpacks that archive into RAM, mounts and uses it as initial root file system. The mounting of the real root file system occurs in early user space. klibc provides utilities to setup root. Having the root on MD, LVM2, LUKS or NFS is also supported. Any boot loader with initrd support is able to load an initramfs archive. Package: python-chardet-whl Status: install ok installed Priority: optional Section: python Installed-Size: 180 Maintainer: Piotr Ożarowski Architecture: all Source: chardet Version: 2.3.0-1 Depends: python3-pkg-resources Description: universal character encoding detector Chardet takes a sequence of bytes in an unknown character encoding, and attempts to determine the encoding. . Supported encodings: * ASCII, UTF-8, UTF-16 (2 variants), UTF-32 (4 variants) * Big5, GB2312, EUC-TW, HZ-GB-2312, ISO-2022-CN (Traditional and Simplified Chinese) * EUC-JP, SHIFT_JIS, ISO-2022-JP (Japanese) * EUC-KR, ISO-2022-KR (Korean) * KOI8-R, MacCyrillic, IBM855, IBM866, ISO-8859-5, windows-1251 (Cyrillic) * ISO-8859-2, windows-1250 (Hungarian) * ISO-8859-5, windows-1251 (Bulgarian) * windows-1252 (English) * ISO-8859-7, windows-1253 (Greek) * ISO-8859-8, windows-1255 (Visual and Logical Hebrew) * TIS-620 (Thai) . This library is a port of the auto-detection code in Mozilla. . This package contains the universal wheel. Homepage: https://github.com/chardet/chardet Package: libmysqlclient18 Status: install ok installed Priority: optional Section: libs Installed-Size: 3417 Maintainer: Debian MySQL Maintainers Architecture: amd64 Multi-Arch: same Source: mysql-5.5 Version: 5.5.46-0+deb8u1 Depends: mysql-common (>= 5.5.46-0+deb8u1), libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1), zlib1g (>= 1:1.1.4) Pre-Depends: multiarch-support Description: MySQL database client library MySQL is a fast, stable and true multi-user, multi-threaded SQL database server. SQL (Structured Query Language) is the most popular database query language in the world. The main goals of MySQL are speed, robustness and ease of use. . This package includes the client library. Homepage: http://dev.mysql.com/ Package: db5.1-util Status: install ok installed Priority: optional Section: oldlibs Installed-Size: 1874 Maintainer: Debian Berkeley DB Group Architecture: amd64 Source: db Version: 5.1.29-9 Replaces: libdb5.1 (<< 5.1.29-8~) Depends: libc6 (>= 2.17) Breaks: libdb5.1 (<< 5.1.29-8~) Description: Berkeley v5.1 Database Utilities This package provides different tools for manipulating databases in the Berkeley v5.1 database format, and includes: - db5.1_archive: write the pathnames of the log files no longer in use. - db5.1_checkpoint: daemon process to monitor the database log and checkpoint it periodically. - db5.1_deadlock: traverse the database environment lock region and abort lock requests when a deadlock is detected. - db5.1_load: loads (and creates) a database from standard input. - db5.1_dump: read a database file and write it in a format understood by db4.{2..8}_load. - db5.1_printlog: dump log files in human readable format. - db5.1_stat: display statistics for Berkeley DB environments. - db5.1_upgrade: upgrades the version of files and the databases they contain. - db5.1_verify: check the structure of files and their databases. Homepage: http://www.oracle.com/technology/software/products/berkeley-db/index.html Package: libpcre3 Status: install ok installed Priority: important Section: libs Installed-Size: 672 Maintainer: Mark Baker Architecture: amd64 Multi-Arch: same Source: pcre3 Version: 2:8.35-3.3 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~) Conflicts: libpcre3-dev (<= 4.3-3) Description: Perl 5 Compatible Regular Expression Library - runtime files This is a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. . This package contains the runtime libraries. Package: dnsutils Status: install ok installed Priority: standard Section: net Installed-Size: 378 Maintainer: LaMont Jones Architecture: amd64 Source: bind9 Version: 1:9.9.5.dfsg-9+deb8u3 Replaces: bind, bind9 (<< 1:9.1.0-3) Depends: libbind9-90 (= 1:9.9.5.dfsg-9+deb8u3), libc6 (>= 2.4), libcap2 (>= 1:2.10), libcomerr2 (>= 1.01), libdns100 (= 1:9.9.5.dfsg-9+deb8u3), libgssapi-krb5-2 (>= 1.6.dfsg.2), libisc95 (= 1:9.9.5.dfsg-9+deb8u3), libisccfg90 (= 1:9.9.5.dfsg-9+deb8u3), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), liblwres90 (= 1:9.9.5.dfsg-9+deb8u3), libssl1.0.0 (>= 1.0.0), libxml2 (>= 2.6.27), bind9-host | host Suggests: rblcheck Conflicts: netstd (<< 2.00) Description: Clients provided with BIND The Berkeley Internet Name Domain (BIND) implements an Internet domain name server. BIND is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package delivers various client programs related to DNS that are derived from the BIND source tree. . - dig - query the DNS in various ways - nslookup - the older way to do it - nsupdate - perform dynamic updates (See RFC2136) Package: librtmp1 Status: install ok installed Priority: extra Section: libs Installed-Size: 164 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: rtmpdump Version: 2.4+20150115.gita107cef-1 Depends: libc6 (>= 2.14), libgmp10, libgnutls-deb0-28 (>= 3.3.0), libhogweed2, libnettle4, zlib1g (>= 1:1.1.4) Pre-Depends: multiarch-support Description: toolkit for RTMP streams (shared library) A small dumper for media content streamed over the RTMP protocol (like BBC's iPlayer high quality streams). Supplying an RTMP URL will result in a dumped flv file, which can be played/transcoded with standard tools. . This package contains the shared libraries, header files needed by programs that want to use librtmp. Homepage: http://rtmpdump.mplayerhq.hu/ Package: libdevmapper1.02.1 Status: install ok installed Priority: optional Section: libs Installed-Size: 330 Maintainer: Debian LVM Team Architecture: amd64 Multi-Arch: same Source: lvm2 (2.02.111-2.2) Version: 2:1.02.90-2.2 Depends: libc6 (>= 2.14), libselinux1 (>= 1.32), libudev1 (>= 183), dmsetup (>= 2:1.02.90-2.2) Pre-Depends: multiarch-support Breaks: lvm2 (<< 2.02.66) Conflicts: libdevmapper1.02 Description: Linux Kernel Device Mapper userspace library The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management) Team's implementation of a minimalistic kernel-space driver that handles volume management, while keeping knowledge of the underlying device layout in user-space. This makes it useful for not only LVM, but EVMS, software raid, and other drivers that create "virtual" block devices. . This package contains the (user-space) shared library for accessing the device-mapper; it allows usage of the device-mapper through a clean, consistent interface (as opposed to through kernel ioctls). Homepage: http://sources.redhat.com/lvm2/ Package: libmro-compat-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 59 Maintainer: Debian Perl Group Architecture: all Version: 0.12-1 Depends: perl, libclass-c3-perl (>= 0.24) Recommends: libclass-c3-xs-perl Description: mro::* interface compatibility for Perls < 5.9.5 The "mro" namespace provides several utilities for dealing with method resolution order and method caching in general in Perl 5.9.5 and higher. . MRO::Compat provides those interfaces for earlier versions of Perl (back to 5.6.0 anyway). Homepage: http://search.cpan.org/dist/MRO-Compat/ Package: aptitude Status: install ok installed Priority: important Section: admin Installed-Size: 4748 Maintainer: Aptitude Development Team Architecture: amd64 Multi-Arch: foreign Source: aptitude (0.6.11-1) Version: 0.6.11-1+b1 Depends: aptitude-common (= 0.6.11-1), libapt-pkg4.12 (>= 0.9.16), libboost-iostreams1.55.0, libc6 (>= 2.14), libcwidget3, libgcc1 (>= 1:4.1.1), libncursesw5 (>= 5.6+20070908), libsigc++-2.0-0c2a (>= 2.2.0), libsqlite3-0 (>= 3.6.5), libstdc++6 (>= 4.9), libtinfo5, libxapian22 Recommends: aptitude-doc-en | aptitude-doc, sensible-utils, libparse-debianchangelog-perl Suggests: tasksel, debtags, apt-xapian-index Conffiles: /etc/cron.daily/aptitude f934222d5eb13cb132e2751bdb023318 /etc/logrotate.d/aptitude fb66bc5dc8c13edbcb83cea15ff86959 Description: terminal-based package manager aptitude is a package manager with a number of useful features, including: a mutt-like syntax for matching packages in a flexible manner, dselect-like persistence of user actions, the ability to retrieve and display the Debian changelog of most packages, and a command-line mode similar to that of apt-get. . aptitude is also Y2K-compliant, non-fattening, naturally cleansing, and housebroken. Homepage: http://aptitude.alioth.debian.org/ Package: libswitch-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 76 Maintainer: Debian Perl Group Architecture: all Version: 2.17-2 Depends: perl Description: switch statement for Perl Switch.pm implements a generalized case mechanism that covers many possible combinations of switch and case values. . This is an obsolete module provided for compatiblity since it is being removed from the core. For perl 5.10 and above the "given/when" builtins are much preferred. Homepage: https://metacpan.org/release/Switch Package: cpp-4.9 Status: install ok installed Priority: optional Section: interpreters Installed-Size: 16406 Maintainer: Debian GCC Maintainers Architecture: amd64 Source: gcc-4.9 Version: 4.9.2-10 Replaces: gccgo-4.9 (<< 4.9.2-10) Depends: gcc-4.9-base (= 4.9.2-10), libc6 (>= 2.14), libcloog-isl4 (>= 0.17), libgmp10 (>= 2:5.0.1~), libisl10 (>= 0.10), libmpc3, libmpfr4 (>= 3.1.2), zlib1g (>= 1:1.1.4) Suggests: gcc-4.9-locales (>= 4.9) Description: GNU C preprocessor A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor but not the compiler. Homepage: http://gcc.gnu.org/ Package: m4 Status: install ok installed Priority: standard Section: interpreters Installed-Size: 389 Maintainer: Santiago Vila Architecture: amd64 Multi-Arch: foreign Version: 1.4.17-4 Depends: libc6 (>= 2.17), libsigsegv2 (>= 2.9) Description: macro processing language GNU `m4' is an implementation of the traditional UNIX macro processor. It is mostly SVR4 compatible, although it has some extensions (for example, handling more than 9 positional parameters to macros). `m4' also has builtin functions for including files, running shell commands, doing arithmetic, etc. Autoconf needs GNU `m4' for generating `configure' scripts, but not for running them. Homepage: http://www.gnu.org/software/m4/ Package: sgml-base Status: install ok installed Priority: optional Section: text Installed-Size: 113 Maintainer: Debian XML/SGML Group Architecture: all Version: 1.26+nmu4 Depends: perl Pre-Depends: dpkg (>= 1.16.4) Suggests: sgml-base-doc Conflicts: sgml-data (<= 0.02), sgmltools-2 (<= 2.0.2-4) Description: SGML infrastructure and SGML catalog file support This package creates the SGML infrastructure directories and provides SGML catalog file support in compliance with the current Debian SGML Policy draft: . * infrastructure directories: - /etc/sgml - /usr/share/sgml/{declaration,dtd,entities,misc,stylesheet} - /usr/share/local/sgml/{declaration,dtd,entities,misc,stylesheet} . * update-catalog(8): tool for maintaining the root SGML catalog file and the package SGML catalog files in the '/etc/sgml' directory Package: hdparm Status: install ok installed Priority: optional Section: admin Installed-Size: 290 Maintainer: Stephen Gran Architecture: amd64 Version: 9.43-2 Replaces: apmd (<= 3.0.2-1.15) Depends: libc6 (>= 2.14), lsb-base Recommends: powermgmt-base Suggests: apmd Conffiles: /etc/apm/event.d/20hdparm 69c0a826b29c8f40b7ca5e56e53d7f83 /etc/default/hdparm 0db15ea4edf8e848c9962bb16b7da96f /etc/hdparm.conf cdd0ed05481f6071f9711c7d1735b98a /etc/init.d/hdparm dbd686b4218f3aa0f6805efca143b2c9 Description: tune hard disk parameters for high performance Get/set device parameters for Linux SATA/IDE drives. Primary use is for enabling irq-unmasking and IDE multiplemode. Homepage: http://sourceforge.net/projects/hdparm/ Package: libmemcached11 Status: install ok installed Priority: optional Section: libs Installed-Size: 272 Maintainer: Michael Fladischer Architecture: amd64 Multi-Arch: same Source: libmemcached Version: 1.0.18-4 Depends: libc6 (>= 2.16), libgcc1 (>= 1:4.1.1), libsasl2-2, libstdc++6 (>= 4.1.1) Pre-Depends: multiarch-support Description: C and C++ client library to the memcached server libmemcached is a C and C++ client library to the memcached server (http://memcached.org/). It has been designed to be light on memory usage, thread safe, and provide full access to server side methods. . A few notes on its design: . * Synchronous and Asynchronous support. * Access to large object support. * Local replication. * TCP and Unix Socket protocols. * A half dozen or so different tuneable hash algorithms. * Implementations of the new cas, replace, and append operators. * Man pages written up on entire API. * Implements both modulo and consistent hashing solutions. * Tools to Manage your Memcached networks. . This package provides the libmemcached shared library itself. Homepage: http://libmemcached.org/libMemcached.html Package: python3-pkg-resources Status: install ok installed Priority: optional Section: python Installed-Size: 154 Maintainer: Matthias Klose Architecture: all Source: python-setuptools Version: 5.5.1-1 Provides: python3.3-setuptools Depends: python3:any (>= 3.3), python3:any (<< 3.5) Suggests: python3-setuptools Conflicts: python-pkg-resources (= 0.6.10-2) Description: Package Discovery and Resource Access using pkg_resources The pkg_resources module provides an API for Python libraries to access their resource files, and for extensible applications and frameworks to automatically discover plugins. It also provides runtime support for using C extensions that are inside zipfile-format eggs, support for merging packages that have separately-distributed modules or subpackages, and APIs for managing Python's current "working set" of active packages. Homepage: https://pypi.python.org/pypi/setuptools Package: libgeoip1 Status: install ok installed Priority: optional Section: libs Installed-Size: 261 Maintainer: Patrick Matthäi Architecture: amd64 Multi-Arch: same Source: geoip Version: 1.6.2-4 Depends: libc6 (>= 2.4) Pre-Depends: multiarch-support Recommends: geoip-database Suggests: geoip-bin Description: non-DNS IP-to-country resolver library GeoIP is a C library that enables the user to find the country that any IP address or hostname originates from. It uses a file based database. . This database simply contains IP blocks as keys, and countries as values and it should be more complete and accurate than using reverse DNS lookups. . This package contains the shared library. Homepage: http://www.maxmind.com/ Package: libpod-latex-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 129 Maintainer: Debian Perl Group Architecture: all Version: 0.61-1 Depends: perl Description: module to convert Pod data to formatted LaTeX Pod::LaTeX is a module to convert documentation in the Pod format into LaTeX. The pod2latex command uses this module for translation. . Pod::LaTeX is a derived class from Pod::Select. Homepage: https://metacpan.org/release/Pod-LaTeX/ Package: python-pkg-resources Status: install ok installed Priority: optional Section: python Installed-Size: 183 Maintainer: Matthias Klose Architecture: all Source: python-setuptools Version: 5.5.1-1 Provides: python2.7-setuptools Depends: python:any (>= 2.7), python:any (<< 2.8) Suggests: python-distribute, python-distribute-doc Conflicts: python-setuptools (<< 0.6c8-3) Description: Package Discovery and Resource Access using pkg_resources The pkg_resources module provides an API for Python libraries to access their resource files, and for extensible applications and frameworks to automatically discover plugins. It also provides runtime support for using C extensions that are inside zipfile-format eggs, support for merging packages that have separately-distributed modules or subpackages, and APIs for managing Python's current "working set" of active packages. Homepage: https://pypi.python.org/pypi/setuptools Python-Version: 2.7 Package: libisccfg90 Status: install ok installed Priority: optional Section: libs Installed-Size: 192 Maintainer: LaMont Jones Architecture: amd64 Source: bind9 Version: 1:9.9.5.dfsg-9+deb8u3 Replaces: libbind0 Depends: libc6 (>= 2.4), libcap2 (>= 1:2.10), libcomerr2 (>= 1.01), libdns100, libgssapi-krb5-2 (>= 1.6.dfsg.2), libisc95, libisccc90, libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), libssl1.0.0 (>= 1.0.0), libxml2 (>= 2.6.27) Conflicts: libbind0, libbind9-41 Description: Config File Handling Library used by BIND The Berkeley Internet Name Domain (BIND) implements an Internet domain name server. BIND is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package delivers the libisccfg shared library used by BIND's daemons and clients to read and write ISC-style configuration files like named.conf and rndc.conf. Package: golang-go Status: deinstall ok config-files Priority: optional Section: devel Installed-Size: 68267 Maintainer: Ondřej Surý Architecture: amd64 Source: golang Version: 2:1.0.2-1.1 Config-Version: 2:1.0.2-1.1 Replaces: golang-tools, golang-weekly-go, golang-weekly-tools Provides: go-compiler, golang-tools, golang-weekly-go, golang-weekly-tools Depends: libc6 (>= 2.3), debconf (>= 0.5) | debconf-2.0, perl, golang-src (>= 2:1.0.2-1.1) Conflicts: golang-tools, golang-weekly-go, golang-weekly-tools Description: Go programming language compiler The Go programming language is an open source project to make programmers more productive. Go is expressive, concise, clean, and efficient. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel type system enables flexible and modular program construction. Go compiles quickly to machine code yet has the convenience of garbage collection and the power of run-time reflection. It's a fast, statically typed, compiled language that feels like a dynamically typed, interpreted language. . This package provides an assembler, a compiler, and a linker for the Go programming language. This is Google's implementation of the Go tool chain. Homepage: http://golang.org/ Package: lsb-release Status: install ok installed Priority: optional Section: misc Installed-Size: 97 Maintainer: Debian LSB Team Architecture: all Multi-Arch: foreign Source: lsb Version: 4.1+Debian13+nmu1 Depends: python (>= 2.7), python (<< 2.8) Recommends: apt Suggests: lsb Description: Linux Standard Base version reporting utility The Linux Standard Base (http://www.linuxbase.org/) is a standard core system that third-party applications written for Linux can depend upon. . The lsb-release command is a simple tool to help identify the Linux distribution being used and its compliance with the Linux Standard Base. LSB conformance will not be reported unless the required metapackages are installed. . While it is intended for use by LSB packages, this command may also be useful for programmatically distinguishing between a pure Debian installation and derived distributions. Homepage: http://www.linuxfoundation.org/collaborate/workgroups/lsb Package: coreutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 14249 Maintainer: Michael Stone Architecture: amd64 Multi-Arch: foreign Version: 8.23-4 Replaces: mktemp, realpath, timeout Pre-Depends: libacl1 (>= 2.2.51-8), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.17), libselinux1 (>= 2.1.13) Conflicts: timeout Description: GNU core utilities This package contains the basic file, shell and text manipulation utilities which are expected to exist on every operating system. . Specifically, this package includes: arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp csplit cut date dd df dir dircolors dirname du echo env expand expr factor false flock fmt fold groups head hostid id install join link ln logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac tail tee test timeout touch tr true truncate tsort tty uname unexpand uniq unlink users vdir wc who whoami yes Homepage: http://gnu.org/software/coreutils Package: file Status: install ok installed Priority: standard Section: utils Installed-Size: 119 Maintainer: Christoph Biedl Architecture: amd64 Multi-Arch: foreign Version: 1:5.22+15-2 Depends: libc6 (>= 2.4), libmagic1 (= 1:5.22+15-2), zlib1g (>= 1:1.1.4) Description: Determines file type using "magic" numbers File tests each argument in an attempt to classify it. There are three sets of tests, performed in this order: filesystem tests, magic number tests, and language tests. The first test that succeeds causes the file type to be printed. Homepage: http://www.darwinsys.com/file/ Package: libdns-export100 Status: install ok installed Priority: optional Section: libs Installed-Size: 1281 Maintainer: LaMont Jones Architecture: amd64 Source: bind9 Version: 1:9.9.5.dfsg-9+deb8u3 Depends: libc6 (>= 2.4), libisc-export95 Pre-Depends: multiarch-support Description: Exported DNS Shared Library The Berkeley Internet Name Domain (BIND) implements an Internet domain name server. BIND is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package delivers the exported libdns shared library. Package: at Status: install ok installed Priority: standard Section: admin Installed-Size: 103 Maintainer: Ansgar Burchardt Architecture: amd64 Multi-Arch: foreign Version: 3.1.16-1 Depends: libc6 (>= 2.14), libpam0g (>= 0.99.7.1), init-system-helpers (>= 1.18~), lsb-base (>= 3.2-14), libpam-runtime (>= 1.0.1-11) Recommends: default-mta | mail-transport-agent Conffiles: /etc/init.d/atd ce2de503acc3de02f544571e89d4d717 /etc/pam.d/atd 1e199ec20b759871a30ff5540fc7950b /etc/at.deny 8cb7e7632119dc26115436938efd2522 Description: Delayed job execution and batch processing At and batch read shell commands from standard input storing them as a job to be scheduled for execution in the future. . Use at to run the job at a specified time batch to run the job when system load levels permit Package: python-roman Status: install ok installed Priority: optional Section: python Installed-Size: 60 Maintainer: Andrea Colangelo Architecture: all Version: 2.0.0-1 Depends: python (>= 2.7), python (<< 2.8) Description: module for generating/analyzing Roman numerals for Python 2 This module converts from and to Roman numerals. It can convert numbers from 1 to 4999 and understands the common shortcuts (IX == 9), but not illegal ones (MIM == 1999). . This package includes Python 2 modules. Homepage: http://pypi.python.org/pypi/roman/ Package: libbind9-90 Status: install ok installed Priority: standard Section: libs Installed-Size: 112 Maintainer: LaMont Jones Architecture: amd64 Source: bind9 Version: 1:9.9.5.dfsg-9+deb8u3 Replaces: libbind0 Depends: libc6 (>= 2.4), libcap2 (>= 1:2.10), libcomerr2 (>= 1.01), libdns100, libgssapi-krb5-2 (>= 1.6.dfsg.2), libisc95, libisccfg90, libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), libssl1.0.0 (>= 1.0.0), libxml2 (>= 2.6.27) Conflicts: libbind0, libbind9-41 Description: BIND9 Shared Library used by BIND The Berkeley Internet Name Domain (BIND) implements an Internet domain name server. BIND is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package delivers the libbind9 shared library used by BIND's daemons and clients. Package: iproute2 Status: install ok installed Priority: important Section: net Installed-Size: 1093 Maintainer: Debian iproute2 Maintainers Architecture: amd64 Multi-Arch: foreign Version: 3.16.0-2 Replaces: iproute Provides: arpd Depends: libc6 (>= 2.14), libdb5.3, libselinux1 (>= 2.0.15) Recommends: libatm1 (>= 2.4.1-17~), libxtables10 Suggests: iproute2-doc Conflicts: arpd, iproute (<< 20130000-1) Conffiles: /etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463 /etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457 /etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f /etc/iproute2/rt_protos 95ce0b4b5b79f5a8a45941fb418a904c /etc/iproute2/rt_dsfield 4264d5c7c8298300185aa04e1a736934 /etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f /etc/iproute2/ematch_map b91e7f9b26918449bade9573f8871d61 Description: networking and traffic control tools The iproute2 suite is a collection of utilities for networking and traffic control. . These tools communicate with the Linux kernel via the (rt)netlink interface, providing advanced features not available through the legacy net-tools commands 'ifconfig' and 'route'. Homepage: http://www.linux-foundation.org/en/Net:Iproute2 Package: tcpd Status: install ok installed Priority: optional Section: net Installed-Size: 79 Maintainer: Marco d'Itri Architecture: amd64 Multi-Arch: foreign Source: tcp-wrappers Version: 7.6.q-25 Replaces: libwrap0 (<< 7.6-8) Depends: libc6 (>= 2.4), libwrap0 (>= 7.6-4~) Description: Wietse Venema's TCP wrapper utilities Wietse Venema's network logger, also known as TCPD or LOG_TCP. . These programs log the client host name of incoming telnet, ftp, rsh, rlogin, finger etc. requests. . Security options are: - access control per host, domain and/or service; - detection of hostMarco d'Itri Architecture: amd64 Multi-Arch: same Source: kmod Version: 18-3 Depends: libc6 (>= 2.17) Pre-Depends: multiarch-support Description: libkmod shared library This library provides an API for insertion, removal, configuration and listing of kernel modules. Package: libio-socket-ssl-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 462 Maintainer: Debian Perl Group Architecture: all Version: 2.002-2+deb8u1 Depends: libnet-ssleay-perl (>= 1.59), netbase, perl Recommends: libnet-libidn-perl | libnet-idn-encode-perl | liburi-perl, perl (>= 5.15.6) | libsocket-perl (>= 1.950) | libsocket6-perl, perl (>= 5.19.8) | libio-socket-ip-perl (>= 0.20) | libio-socket-inet6-perl Suggests: ca-certificates Description: Perl module implementing object oriented interface to SSL sockets This module is a true drop-in replacement for IO::Socket::INET that uses SSL to encrypt data before it is transferred to a remote server or client. IO::Socket::SSL supports all the extra features that one needs to write a full-featured SSL client or server application: multiple SSL contexts, cipher selection, certificate verification, and SSL version selection. As an extra bonus, it works perfectly with mod_perl. . IO::Socket::SSL uses IPv6 if libio-socket-ip-perl (>= 0.20) or libio-socket-inet6-perl is installed. Homepage: https://metacpan.org/release/IO-Socket-SSL Package: libisc95 Status: install ok installed Priority: standard Section: libs Installed-Size: 445 Maintainer: LaMont Jones Architecture: amd64 Source: bind9 Version: 1:9.9.5.dfsg-9+deb8u3 Replaces: libbind0 Depends: libc6 (>= 2.15), libcap2 (>= 1:2.10), libxml2 (>= 2.7.4) Conflicts: libbind0, libbind9-41 Description: ISC Shared Library used by BIND The Berkeley Internet Name Domain (BIND) implements an Internet domain name server. BIND is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package delivers the libisc shared library used by BIND's daemons and clients. Package: libxml2 Status: install ok installed Priority: standard Section: libs Installed-Size: 1764 Maintainer: Debian XML/SGML Group Architecture: amd64 Multi-Arch: same Version: 2.9.1+dfsg1-5 Depends: libc6 (>= 2.15), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.3.3) Pre-Depends: multiarch-support Recommends: xml-core Description: GNOME XML library XML is a metalanguage to let you design your own markup language. A regular markup language defines a way to describe information in a certain class of documents (eg HTML). XML lets you define your own customized markup languages for many classes of document. It can do this because it's written in SGML, the international standard metalanguage for markup languages. . This package provides a library providing an extensive API to handle such XML data files. Homepage: http://xmlsoft.org/ Package: aptitude-common Status: install ok installed Priority: important Section: admin Installed-Size: 9930 Maintainer: Aptitude Development Team Architecture: all Multi-Arch: foreign Source: aptitude Version: 0.6.11-1 Replaces: aptitude (<< 0.6.8-1) Recommends: aptitude Breaks: aptitude (<< 0.6.8-1) Description: architecture independent files for the aptitude package manager aptitude is a package manager with a number of useful features, including: a mutt-like syntax for matching packages in a flexible manner, dselect-like persistence of user actions, the ability to retrieve and display the Debian changelog of most packages, and a command-line mode similar to that of apt-get. . This package contains the data files and translations used by aptitude. Homepage: http://aptitude.alioth.debian.org/ Package: libblkid1 Status: install ok installed Priority: required Section: libs Installed-Size: 326 Maintainer: Debian util-linux Maintainers Architecture: amd64 Multi-Arch: same Source: util-linux Version: 2.25.2-6 Depends: libc6 (>= 2.17), libuuid1 (>= 2.16) Pre-Depends: multiarch-support Description: block device id library The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifying filesystems by hard-coded device names, but via a logical naming system instead. Package: ibritish Status: install ok installed Priority: optional Section: text Installed-Size: 244 Maintainer: Robert Luberda Architecture: all Source: ispell Version: 3.3.02-6 Provides: ispell-dictionary Depends: dictionaries-common, ienglish-common (= 3.3.02-6), ispell, debconf (>= 0.5) | debconf-2.0 Suggests: wbritish Description: British English dictionary for ispell (standard version) This package provides the standard, medium-sized British English dictionary, based on the britishmed+ dictionary supplied with the source for ispell, with additional words added from the more comprehensive wbritish word list package. . There are also -small, -large, -huge, and -insane versions of this dictionary, and there are iamerican* packages as well. . The package also suggests wbritish because ispell's (L)ookup command needs a word list. Homepage: http://www.lasr.cs.ucla.edu/geoff/ispell.html Package: libclass-isa-perl Status: install ok installed Priority: standard Section: perl Installed-Size: 53 Maintainer: Debian Perl Group Architecture: all Version: 0.36-5 Description: report the search path for a class's ISA tree Class::ISA returns the list of classes that the current class inherits from, listed in the order that Perl would search for a method not implemented in the current class. The list contains no duplicates. Homepage: http://search.cpan.org/dist/Class-ISA/ Package: libcgi-fast-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 55 Maintainer: Debian Perl Group Architecture: all Version: 1:2.04-1 Replaces: libcgi-pm-perl (<< 4) Depends: perl, libcgi-pm-perl (>= 4), libfcgi-perl Breaks: libcgi-pm-perl (<< 4) Description: CGI subclass for work with FCGI CGI::Fast is a subclass of the CGI object created by CGI.pm. It is specialized to work with the FCGI module, which greatly speeds up CGI scripts by turning them into persistently running server processes. Scripts that perform time-consuming initialization processes, such as loading large modules or opening persistent database connections, will see large performance improvements. Homepage: https://metacpan.org/release/CGI-Fast Package: libhtml-tree-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 516 Maintainer: Debian Perl Group Architecture: all Version: 5.03-1 Depends: perl, libhtml-parser-perl, libhtml-tagset-perl Recommends: libhtml-format-perl, libwww-perl Description: Perl module to represent and create HTML syntax trees HTML::Tree is a collection of modules that represent, create and extract information from HTML syntax trees. These modules used to be part of the libwww-perl distribution, but are now unbundled in order to facilitate a separate development track. Homepage: https://metacpan.org/release/HTML-Tree/ Package: libterm-readkey-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 63 Maintainer: Debian Perl Group Architecture: amd64 Source: libterm-readkey-perl (2.32-1) Version: 2.32-1+b1 Depends: perl (>= 5.20.0-4), perlapi-5.20.0, libc6 (>= 2.15) Description: perl module for simple terminal control Term::ReadKey is a compiled perl module dedicated to providing simple control over terminal driver modes (cbreak, raw, cooked, etc.) support for non-blocking reads, if the architecture allows, and some generalized handy functions for working with terminals. One of the main goals is t of these modules include Web frameworks, database integration, networking protocols, and encryption. Perl provides interfaces to C and C++ for custom extension development. Homepage: http://dev.perl.org/perl5/ Package: libgpg-error0 Status: install ok installed Priority: standard Section: libs Installed-Size: 444 Maintainer: Debian GnuPG Maintainers Architecture: amd64 Multi-Arch: same Source: libgpg-error Version: 1.17-3 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: library for common error values and messages in GnuPG components Library that defines common error values for all GnuPG components. Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt, pinentry, SmartCard Daemon and possibly more in the future. Homepage: http://www.gnupg.org/related_software/libgpg-error/ Package: uwsgi Status: install ok installed Priority: optional Section: web Installed-Size: 73 Maintainer: Janos Guljas Architecture: amd64 Version: 2.0.7-1 Depends: uwsgi-core (= 2.0.7-1), lsb-base, initscripts (>= 2.88dsf-13.3) Conffiles: /etc/default/uwsgi 5c156d76d22dd33ada4ef8c50315c39d /etc/init.d/uwsgi 613eb5569c1bcdd20c294d221c6cec15 /etc/logrotate.d/uwsgi 5af4571f64807e669660fde432c4bfcc /etc/uwsgi/apps-available/README bec9ebb30f203160cbbc7e61f682536a /etc/uwsgi/apps-enabled/README cb648d9c7863d624b3c04de59da3e531 Description: fast, self-healing application container server uWSGI presents a complete stack for networked/clustered web applications, implementing message/object passing, caching, RPC and process management. It uses the uwsgi protocol for all the networking/interprocess communications. . uWSGI can be run in preforking, threaded, asynchronous/evented modes and supports various forms of green threads/coroutines (such as uGreen, Greenlet, Fiber). uWSGI provides several methods of configuration: via command line, via environment variables, via XML, INI, YAML configuration files, via LDAP and more. . On top of all this, it is designed to be fully modular. This means that different plugins can be used in order to add compatibility with tons of different technology on top of the same core. . This package depends on uWSGI core binary and installs: * init.d script for running uWSGI daemon(s) with options defined in custom user-created configuration files * infrastructure for running daemons (like common locations of communication sockets, logs) Homepage: http://projects.unbit.it/uwsgi/ Package: libpython-stdlib Status: install ok installed Priority: optional Section: python Installed-Size: 54 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: same Source: python-defaults Version: 2.7.9-1 Depends: libpython2.7-stdlib (>= 2.7.9-1~) Description: interactive high-level object-oriented language (default python version) Python, the high-level, interactive object oriented language, includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package is a dependency package, which depends on Debian's default Python version (currently v2.7). Homepage: http://www.python.org/ Package: libgd2-noxpm Status: deinstall ok config-files Priority: optional Section: libs Installed-Size: 603 Maintainer: GD team Architecture: amd64 Multi-Arch: same Source: libgd2 Version: 2.0.36~rc1~dfsg-6.1 Config-Version: 2.0.36~rc1~dfsg-6.1 Provides: libgd2 Depends: libc6 (>= 2.11), libfreetype6 (>= 2.2.1), libjpeg8 (>= 8c), libpng12-0 (>= 1.2.13-4), zlib1g (>= 1:1.1.4) Pre-Depends: multiarch-support Suggests: libgd-tools Conflicts: libgd2, libgd2-xpm Description: GD Graphics Library version 2 (without XPM support) GD is a graphics library. It allows your code to quickly draw images complete with lines, arcs, text, multiple colours, cut and paste from other images, flood fills, and write out the result as a PNG file. This is particularly useful in World Wide Web applications, where PNG is one of the formats accepted for inline images by most browsers. . This is the runtime package of the library, built without XPM (X pixmap) or fontconfig support. Homepage: http://www.libgd.org/ Package: libfile-fcntllock-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 168 Maintainer: Debian Perl Group Architecture: amd64 Source: libfile-fcntllock-perl (0.22-1) Version: 0.22-1+b1 Depends: perl (>= 5.20.0-4), perlapi-5.20.0, libc6 (>= 2.4) Description: Perl module for file locking with fcntl(2) File::FcntlLock is a Perl module to do file locking in an object oriented fashion using the fcntl(2) system call. This allows locks on parts of a file as well as on the whole file and overcomes some known problems with flock(2), on which Perl's flock() function is based. . Furthermore due to its design it supports reliable locking over NFS. Homepage: https://metacpan.org/release/File-FcntlLock Package: python-debian Status: install ok installed Priority: optional Section: python Installed-Size: 285 Maintainer: Debian python-debian Maintainers Architecture: all Version: 0.1.27 Replaces: python-deb822 Provides: python-deb822 Depends: python-chardet, python-six (>> 1.4~), python:any (<< 2.8), python:any (>= 2.7.5-5~) Recommends: python-apt Suggests: gpgv Conflicts: python-deb822 Description: Python modules to work with Debian-related data formats This package provides Python modules that abstract many formats of Debian related files. Currently handled are: * Debtags information (debian.debtags module) * debian/changelog (debian.changelog module) * Packages files, pdiffs (debian.debian_support module) * Control files of single or multiple RFC822-style paragraphs, e.g. debian/control, .changes, .dsc, Packages, Sources, Release, etc. (debian.deb822 module) * Raw .deb and .ar files, with (read-only) access to contained files and meta-information Package: nano Status: install ok installed Priority: important Section: editors Installed-Size: 1667 Maintainer: Jordi Mallach Architecture: amd64 Version: 2.2.6-3 Replaces: pico Provides: editor Depends: dpkg (>= 1.15.4) | install-info, libc6 (>= 2.14), libncursesw5 (>= 5.6+20070908), libtinfo5 Suggests: spell Breaks: alpine-pico (<= 2.00+dfsg-5) Conflicts: pico Conffiles: /etc/nanorc fc57b93c907fefbccf12317d40b4a204 Description: small, friendly text editor inspired by Pico GNU nano is an easy-to-use text editor originally designed as a replacement for Pico, the ncurses-based editor from the non-free mailer package Pine (itself now available under the Apache License as Alpine). . However, nano also implements many features missing in pico, including: - feature toggles; - interactive search and replace (with regular expression support); - go to line (and column) command; - auto-indentation and color syntax-highlighting; - filename tab-completion and support for multiple buffers; - full internationalization support. Homepage: http://www.nano-editor.org/ Package: php5-json Status: install ok installed Priority: optional Section: php Installed-Size: 118 Maintainer: Debian PHP PECL Maintainers Architecture: amd64 Source: php-json Version: 1.3.6-1 Replaces: php5-dev (<< 5.5.0~rc1+dfsg-1~) Depends: libc6 (>= 2.14), libjson-c2 (>= 0.11-3~), phpapi-20131226, ucf Breaks: php5-common (<< 5.5.0~rc1+dfsg-1~), php5-dev (<< 5.5.0~rc1+dfsg-1~) Conffiles: /etc/php5/mods-available/json.ini 0732bc961c57a55cd03a3294554d7a70 Description: JSON module for php5 This package provides a module for JSON functions in PHP scripts. . PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used open source general-purpose scripting language that is especially suited for web development and can be embedded into HTML. Homepage: http://pecl.php.net/package/jsonc Package: libxml-sax-base-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 196 Maintainer: Debian Perl Group Architecture: all Version: 1.07-1 Replaces: libxml-sax-perl (<< 0.99+dfsg-1) Depends: perl Breaks: libxml-sax-perl (<< 0.99+dfsg-1) Description: base class for SAX drivers and filters XML::SAX::Base is a base class for PerlSAX drivers and filters. The main advantages that it provides are easy dispatching of events the right way (ie it takes care for you of checking that the handler has implemented that method, or has defined an AUTOLOAD), and the guarantee that filters will pass along events that they aren't implementing to handlers downstream that might nevertheless be interested in them. . This package also provides XML::SAX::Exception. Homepage: http://search.cpan.org/dist/XML-SAX-Base/ Package: libpython3.4-minimal Status: install ok installed Priority: optional Section: python Installed-Size: 3310 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: same Source: python3.4 Version: 3.4.2-1 Replaces: libpython3.4-stdlib (<< 3.4.0+20140425-1) Depends: libc6 (>= 2.14), libssl1.0.0 (>= 1.0.1) Pre-Depends: multiarch-support Recommends: libpython3.4-stdlib Conflicts: binfmt-support (<< 1.1.2) Conffiles: /etc/python3.4/sitecustomize.py d6b276695157bde06a56ba1b2bc53670 Description: Minimal subset of the Python language (version 3.4) This package contains some essential modules. It is normally not used on it's own, but as a dependency of python3.4-minimal. Package: base-files Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 412 Maintainer: Santiago Vila Architecture: amd64 Multi-Arch: foreign Version: 8+deb8u2 Replaces: base, dpkg (<= 1.15.0), miscutils Provides: base Pre-Depends: awk Breaks: initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~) Conffiles: /etc/debian_version 7353d2d93fb2afd95c6786194d2a1b11 /etc/dpkg/origins/debian 731423fa8ba067262f8ef37882d1e742 /etc/host.conf 4eb63731c9f5e30903ac4fc07a7fe3d6 /etc/issue a7eef95d86c3649a192350845d8cb2ae /etc/issue.net 8b9e8badfb7d547ef236e3165dd363e4 Description: Debian base system miscellaneous files This package contains the basic filesystem hierarchy of a Debian system, and several important miscellaneous files, such as /etc/debian_version, /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others, and the text of several common licenses in use on Debian systems. Package: libyaml-0-2 Status: install ok installed Priority: optional Section: libs Installed-Size: 130 Maintainer: Anders Kaseorg Architecture: amd64 Multi-Arch: same Source: libyaml Version: 0.1.6-3 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: Fast YAML 1.1 parser and emitter library LibYAML is a C library for parsing and emitting data in YAML 1.1, a human-readable data serialization format. Homepage: http://pyyaml.org/wiki/LibYAML Package: libgmp10 Status: install ok installed Priority: optional Section: libs Installed-Size: 556 Maintainer: Debian Science Team Architecture: amd64 Multi-Arch: same Source: gmp Version: 2:6.0.0+dfsg-6 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: Multiprecision arithmetic library GNU MP is a programmer's library for arbitrary precision arithmetic (ie, a bignum package). It can operate on signed integer, rational, and floating point numeric types. . It has a rich set of functions, and the functions have a regular interface. Homepage: http://gmplib.org/ Package: mercurial-common Status: install ok installed Priority: optional Section: vcs Installed-Size: 8408 Maintainer: Python Applications Packaging Team Architecture: all Source: mercurial Version: 3.1.2-2+deb8u1 Replaces: mercurial (<< 2.6.3) Depends: python (>= 2.7), python (<< 2.8), libjs-excanvas Recommends: mercurial (>= 3.1.2-2+deb8u1), ca-certificates Suggests: wish, python-mysqldb, python-pygments, python-openssl Breaks: mercurial (<< 3.1.2-2+deb8u1) Conffiles: /etc/bash_completion.d/mercurial 48ca694ed7b39de0ad4ffde03e5ccf84 /etc/mercurial/hgrc bcefdbdbe45da0913c9ae243149fd497 /etc/mercurial/hgrc.d/cacerts.rc 9f9020947cdcb24be9e042f5fa40a43a /etc/mercurial/hgrc.d/mergetools.rc cb5b3f25f3c452485f561e051aae59ac Description: easy-to-use, scalable distributed version control system (common files) Mercurial is a fast, lightweight Source Control Management system designed for efficient handling of very large distributed projects. .. This package contains the architecture independent components of Mercurial, and is generally useless without the mercurial package. Homepage: http://mercurial.selenic.com/ Package: sensible-utils Status: install ok installed Priority: required Section: utils Installed-Size: 110 Maintainer: Anibal Monsalve Salazar Architecture: all Multi-Arch: foreign Version: 0.0.9 Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~) Description: Utilities for sensible alternative selection This package provides a number of small utilities which are used by programs to sensibly select and spawn an appropriate browser, editor, or pager. . The specific utilities included are: sensible-browser sensible-editor sensible-pager Package: mercurial Status: install ok installed Priority: optional Section: vcs Installed-Size: 190 Maintainer: Python Applications Packaging Team Architecture: amd64 Version: 3.1.2-2+deb8u1 Depends: libc6 (>= 2.14), python (>= 2.7), python (<< 2.8), ucf (>= 2.0020), mercurial-common (= 3.1.2-2+deb8u1) Recommends: openssh-client Suggests: qct, kdiff3 | kdiff3-qt | kompare | meld | tkcvs | mgdiff Breaks: hgsubversion (<< 1.6~), hgview-common (<< 1.8.1), mercurial-git (<< 0.6.1-1~), qct (<< 1.7-2~) Conffiles: /etc/bash_completion.d/mercurial c1a331a9f9684462a0b1e440c0efa430 obsolete /etc/mercurial/hgrc.d/mergetools.rc 1da980ca1489db209f15ecfbbe6a4069 obsolete /etc/mercurial/hgrc.d/cacerts.rc 9f9020947cdcb24be9e042f5fa40a43a obsolete /etc/mercurial/hgrc bcefdbdbe45da0913c9ae243149fd497 obsolete Description: easy-to-use, scalable distributed version control system Mercurial is a fast, lightweight Source Control Management system designed for efficient handling of very large distributed projects. .. Its features include: * O(1) delta-compressed file storage and retrieval scheme * Complete cross-indexing of files and changesets for efficient exploration of project history * Robust SHA1-based integrity checking and append-only storage model * Decentralized development model with arbitrary merging between trees * High-speed HTTP-based network merge protocol * Easy-to-use command-line interface * Integrated stand-alone web interface * Small Python codebase . This package contains the architecture dependent files. Homepage: http://mercurial.selenic.com/ Package: libarchive-extract-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 105 Maintainer: Debian Perl Group Architecture: all Version: 0.72-1 Depends: perl (>= 5.13.6) Description: generic archive extracting module Archive::Extract is a generic archive extraction mechanism. . It allows you to extract any archive file of the type .tar, .tar.gz, .gz, .Z, tar.bz2, .tbz, .bz2, .zip, .xz,, .txz, .tar.xz or .lzma without having to worry how it does so, or use different interfaces for each type by using either perl modules, or commandline tools on your system. Homepage: https://metacpan.org/release/Archive-Extract/ Package: libisc-export95 Status: install ok installed Priority: optional Section: libs Installed-Size: 382 Maintainer: LaMont Jones Architecture: amd64 Source: bind9 Version: 1:9.9.5.dfsg-9+deb8u3 Depends: libc6 (>= 2.15) Pre-Depends: multiarch-support Description: Exported ISC Shared Library The Berkeley Internet Name Domain (BIND) implements an Internet domain name server. BIND is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package delivers the exported libisc shared library. Package: module-init-tools Status: install ok installed Priority: extra Section: admin Installed-Size: 31 Maintainer: Marco d'Itri Architecture: all Source: kmod Version: 18-3 Depends: libkmod2 (= 18-3), kmod Pre-Depends: dpkg (>= 1.15.7.2) Description: transitional dummy package (module-init-tools to kmod) This dummy package is provided to support the transition from module-init-tools to kmod and should be removed afterwards. Package: libmodule-signature-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 108 Maintainer: Debian Perl Group Architecture: all Version: 0.73-1+deb8u2 Depends: perl Recommends: gnupg | gnupg2 Description: module to manipulate CPAN SIGNATURE files Module::Signature is a Perl module that adds cryptographic authentications to CPAN distributions, via the special SIGNATURE file. It also includes various tools to sign distributions and to verify signatures and supports using many different cryptographic hashing algorithms. Homepage: https://metacpan.org/release/Module-Signature/ Package: python-six Status: install ok installed Priority: optional Section: python Installed-Size: 74 Maintainer: Colin Watson Architecture: all Multi-Arch: foreign Source: six Version: 1.8.0-1 Depends: python:any (>= 2.7.5-5~), python:any (<< 2.8) Description: Python 2 and 3 compatibility library (Python 2 interface) Six is a Python 2 and 3 compatibility library. It provides utility functions for smoothing over the differences between the Python versions with the goal of writing Python code that is compatible on both Python versions. . This package provides Six on the Python 2 module path. It is complemented by python3-six. Homepage: http://pythonhosted.org/six/ Package: libopendkim9 Status: install ok installed Priority: extra Section: libs Installed-Size: 203 Maintainer: Mike Markley Architecture: amd64 Source: opendkim Version: 2.9.2-2 Depends: libbsd0 (>= 0.0), libc6 (>= 2.14), libdb5.3, libssl1.0.0 (>= 1.0.0) Description: Library for signing and verifying DomainKeys Identified Mail signatures The OpenDKIM Project is a community effort to develop and maintain a C library for producing DKIM-aware applications and an open source milter for providing DomainKeys Identified Mail (DKIM) service. . This package provides library for implementing signing and verification of the DomainKeys Identified Mail (DKIM) standard. This library provides support for signing and verifying signatures according to RFC 4871, and supports both DomainKeys signing policy and DKIM ADSP. Homepage: http://www.opendkim.org/ Package: libssh2-1 Status: install ok installed Priority: optional Section: libs Installed-Size: 229 Maintainer: Mikhail Gusarov Architecture: amd64 Multi-Arch: same Source: libssh2 Version: 1.4.3-4.1 Depends: libc6 (>= 2.14), libgcrypt20 (>= 1.6.1), zlib1g (>= 1:1.1.4) Pre-Depends: multiarch-support Description: SSH2 client-side library libssh2 is a client-side C library implementing the SSH2 protocol. It supports regular terminal, SCP and SFTP (v1-v5) sessions; port forwarding, X11 forwarding; password, key-based and keyboard-interactive authentication. . This package contains the runtime library. Homepage: http://libssh2.org/ Package: libglib2.0-data Status: install ok installed Priority: optional Section: libs Installed-Size: 9045 Maintainer: Debian GNOME Maintainers Architecture: all Multi-Arch: foreign Source: glib2.0 Version: 2.42.1-1 Description: Common files for GLib library GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package is needed for the runtime libraries to display messages in languages other than English. Homepage: http://www.gtk.org/ Package: passwd Status: install ok installed Priority: required Section: admin Installed-Size: 2132 Maintainer: Shadow package maintainers Architecture: amd64 Multi-Arch: foreign Source: shadow Version: 1:4.2-3 Replaces: manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1) Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libsemanage1 (>= 2.0.3), libpam-modules, debianutils (>= 2.15.2) Conffiles: /etc/cron.daily/passwd db990990933b6f56322725223f13c2bc /etc/default/useradd cc9f9a7713ab62a32cd38363d958f396 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63 Description: change and administer password and group data This package includes passwd, chsh, chfn, and many other programs to maintain password and group data. . Shadow passwords are supported. See /usr/share/doc/passwd/README.Debian Homepage: http://pkg-shadow.alioth.debian.org/ Package: init-system-helpers Status: install ok installed Priority: extra Section: admin Installed-Size: 97 Maintainer: pkg-systemd-maintainers Architecture: all Multi-Arch: foreign Version: 1.22 Depends: perl-base (>= 5.20.1-3) Breaks: systemd (<< 44-12) Description: helper tools for all init systems This package contains helper tools that are necessary for switching between the various init systems that Debian contains (e.g. sysvinit, upstart, systemd). An example is deb-systemd-helper, a script that enables systemd unit files without depending on a running systemd. . While this package is maintained by pkg-systemd-maintainers, it is NOT specific to systemd at all. Maintainers of other init systems are welcome to include their helpers in this package. Package: libpod-readme-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 36 Maintainer: Debian Perl Group Architecture: all Version: 0.11-1 Depends: perl, libregexp-common-perl Description: Perl module to convert POD to README file Pod::Readme is a subclass of Pod::PlainText which provides additional POD markup for generating README files . This module allows authors to mark portions of the POD to be included only in, or to be excluded from the README file. It also allows you to include portions of another file (such as a separate ChangeLog). Homepage: http://search.cpan.org/dist/Pod-Readme/ Package: openssh-server Status: install ok installed Priority: optional Section: net Installed-Size: 950 Maintainer: Debian OpenSSH Maintainers Architecture: amd64 Multi-Arch: foreign Source: openssh Version: 1:6.7p1-5 Replaces: ssh, ssh-krb5 Provides: ssh-server Depends: libc6 (>= 2.17), libcomerr2 (>= 1.01), libgssapi-krb5-2 (>= 1.12.1+dfsg-2), libkrb5-3 (>= 1.6.dfsg.2), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libssl1.0.0 (>= 1.0.1), libwrap0 (>= 7.6-4~), zlib1g (>= 1:1.1.4), debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~), openssh-client (= 1:6.7p1-5), libpam-runtime (>= 0.76-14), libpam-modules (>= 0.72-9), adduser (>= 3.9), dpkg (>= 1.9.0), lsb-base (>= 4.1+Debian3), procps, openssh-sftp-server Recommends: xauth, ncurses-term Suggests: ssh-askpass, rssh, molly-guard, ufw, monkeysphere Conflicts: sftp, ssh-socks, ssh2 Conffiles: /etc/default/ssh 500e3cf069fe9a7b9936108eb9d9c035 /etc/init.d/ssh aca247a51227a8f8b37a8c2a4a703571 /etc/init/ssh.conf 9e5ed011987e63f8035fb847170dfa3f /etc/network/if-up.d/openssh-server 615af9ea3307b85023a35f4ed3c8ff96 /etc/pam.d/sshd 8b4c7a12b031424b2a9946881da59812 /etc/ufw/applications.d/openssh-server 486b78d54b93cc9fdc950c1d52ff479e Description: secure shell (SSH) server, for secure access from remote machines This is the portable version of OpenSSH, a free implementation of the Secure Shell protocol as specified by the IETF secsh working group. . Ssh (Secure Shell) is a program for logging into a remote machine and for executing commands on a remote machine. It provides secure encrypted communications between two untrusted hosts over an insecure network. X11 connections and arbitrary TCP/IP ports can also be forwarded over the secure channel. It can be used to provide applications with a secure communication channel. . This package provides the sshd server. . In some countries it may be illegal to use any encryption at all without a special permit. . sshd replaces the insecure rshd program, which is obsolete for most purposes. Homepage: http://www.openssh.org/ Package: liblwp-mediatypes-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 100 Maintainer: Debian Perl Group Architecture: all Version: 6.02-1 Replaces: libwww-perl (<< 6.00) Depends: perl Breaks: libwww-perl (<< 6.00) Description: module to guess media type for a file or a URL LWP::MediaTypes provides functions for handling media (also known as MIME) types and encodings. The mapping from file extensions to media types is defined by the media.types file. If the ~/.media.types file exists it is used instead. For backwards compatibility it will also look for ~/.mime.types. Homepage: http://search.cpan.org/dist/LWP-MediaTypes/ Package: uwsgi-plugin-python Status: install ok installed Priority: extra Section: web Installed-Size: 234 Maintainer: Janos Guljas Architecture: amd64 Source: uwsgi Version: 2.0.7-1 Provides: httpd-wsgi Depends: libc6 (>= 2.14), libpython2.7 (>= 2.7), uwsgi-core (= 2.0.7-1) Suggests: python-uwsgidecorators Description: WSGI plugin for uWSGI (Python 2) uWSGI presents a complete stack for networked/clustered web applications, implementing message/object passing, caching, RPC and process management. It is designed to be fully modular. This means that different plugins can be used in order to add compatibility with tons of different technology on top of the same core. . This package provides Python WSGI plugin for uWSGI (linked with Python 2 runtime). Homepage: http://projects.unbit.it/uwsgi/ Package: python-pygments Status: install ok installed Priority: optional Section: python Installed-Size: 2516 Maintainer: Piotr Ożarowski Architecture: all Source: pygments Version: 2.0.1+dfsg-1.1 Depends: python, python:any (<< 2.8), python:any (>= 2.7.5-5~) Recommends: python-chardet, python-pkg-resources Suggests: ttf-bitstream-vera Conffiles: /etc/bash_completion.d/pygmentize 71731158ed022286ef8441c00d945549 Description: syntax highlighting package written in Python Pygments aims to be a generic syntax highlighter for general use in all kinds of software such as forum systems, wikis or other applications that need to prettify source code. . Highlights are: * a wide range of common languages and markup formats is supported * special attention is paid to details, increasing quality by a fair amount * support for new languages and formats are added easily * a number of output formats, presently HTML, LaTeX and ANSI sequences * it is usable as a command-line tool and as a library Homepage: http://pygments.org/ Package: openssh-sftp-server Status: install ok installed Priority: optional Section: net Installed-Size: 130 Maintainer: Debian OpenSSH Maintainers Architecture: amd64 Source: openssh Version: 1:6.7p1-5 Replaces: openssh-server (<< 1:6.5p1-5) Depends: libc6 (>= 2.17), openssh-client (= 1:6.7p1-5) Recommends: openssh-server | ssh-server Breaks: openssh-server (<< 1:6.5p1-5) Enhances: openssh-server, ssh-server Description: secure shell (SSH) sftp server module, for SFTP access from remote machines This is the portable version of OpenSSH, a free implementation of the Secure Shell protocol as specified by the IETF secsh working group. . Ssh (Secure Shell) is a program for logging into a remote machine and for executing commands on a remote machine. It provides secure encrypted communications between two untrusted hosts over an insecure network. X11 connections and arbitrary TCP/IP ports can also be forwarded over the secure channel. It can be used to provide applications with a secure communication channel. . This package provides the SFTP server module for the SSH server. It is needed if you want to access your SSH server with SFTP. The SFTP server module also works with other SSH daemons like dropbear. Homepage: http://www.openssh.org/ Package: ncurses-base Essential: yes Status: install ok installed Priority: required Section: misc Installed-Size: 371 Maintainer: Craig Small Architecture: all Multi-Arch: foreign Source: ncurses Version: 5.9+20140913-1 Provides: ncurses-runtime Breaks: ncurses-term (<< 5.7+20100313-3) Conflicts: ncurses, ncurses-runtime Conffiles: /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171 Description: basic terminal type definitions The ncurses library routines are a terminal-independent method of updating character screens with reasonable optimization. . This package contains terminfo data files to support the most common types of terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220, vt52, and xterm. Homepage: http://invisible-island.net/ncurses/ Package: krb5-locales Status: install ok installed Priority: standard Section: localization Installed-Size: 2666 Maintainer: Sam Hartman Architecture: all Multi-Arch: foreign Source: krb5 Version: 1.12.1+dfsg-19+deb8u1 Description: Internationalization support for MIT Kerberos Kerberos is a system for authenticating users and services on a network. Kerberos is a trusted third-party service. That means that there is a third party (the Kerberos server) that is trusted by all the entities on the network (users and services, usually called "principals"). . This is the MIT reference implementation of Kerberos V5. . This package contains internationalized messages for MIT Kerberos. Homepage: http://web.mit.edu/kerberos/ Package: libc-bin Essential: yes Status: install ok installed Priority: required Section: libs Installed-Size: 3262 Maintainer: GNU Libc Maintainers Architecture: amd64 Multi-Arch: foreign Source: glibc Version: 2.19-18+deb8u1 Replaces: libc0.1, libc0.3, libc6, libc6.1 Depends: libc6 (>> 2.19), libc6 (<< 2.20), libcap2 (>= 1:2.10) Breaks: libc0.1 (<< 2.10), libc0.3 (<< 2.10), libc6 (<< 2.10), libc6.1 (<< 2.10) Conffiles: /etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c /etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09 /etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6 Description: GNU C Library: Binaries This package contains utility programs related to the GNU C Library. . * catchsegv: catch segmentation faults in programs * getconf: query system configuration variables * getent: get entries from administrative databases * iconv, iconvconfig: convert between character encodings * ldd, ldconfig: print/configure shared library dependencies * locale, localedef: show/generate locale definitions * tzselect, zdump, zic: select/dump/compile time zones Homepage: http://www.gnu.org/software/libc/libc.html Package: php5-apcu Status: install ok installed Priority: optional Section: php Installed-Size: 244 Maintainer: Debian PHP PECL Maintainers Architecture: amd64 Source: php-apcu Version: 4.0.7-1 Replaces: php-apc (<< 4.0.0), php5-user-cache Provides: php-apc, php5-user-cache Depends: libc6 (>= 2.14), phpapi-20131226 Suggests: php5-gd Conflicts: php-apc (<< 4.0.0), php5-user-cache, php5-xcache, php5-yac Conffiles: /etc/php5/mods-available/apcu.ini 63cdaa57c6c9a68ce51c0862bc1b74a0 Description: APC User Cache for PHP 5 The APCu is userland caching: APC (Alternative PHP Cache) stripped of opcode caching after the deployment of Zend OpCache in PHP 5.5 as the primary solution to opcode caching in future versions of PHP. . The APCu is a fast solution for userland caching (and dumping) of PHP variables locally, it is not distributed like MemcacheD, but they can be used together for optimal caching. Homepage: http://pecl.php.net/package/APCu Package: libmilter1.0.1 Status: install ok installed Priority: extra Section: libs Installed-Size: 275 Maintainer: Debian QA Group Architecture: amd64 Multi-Arch: same Source: sendmail Version: 8.14.4-8 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: Sendmail Mail Filter API (Milter) The Sendmail Mail Filter API (Milter) is designed to allow third-party programs access to mail messages as they are being processed in order to filter meta-information(headers) and content. . The Debian Sendmail package is built to support libmilter. . This package contains libmilter.so Homepage: http://www.sendmail.org Package: libaio1 Status: install ok installed Priority: optional Section: libs Installed-Size: 14 Maintainer: Guillem Jover Architecture: amd64 Multi-Arch: same Source: libaio Version: 0.3.110-1 Depends: libc6 (>= 2.4) Pre-Depends: multiarch-support Description: Linux kernel AIO access library - shared library This library enables userspace to use Linux kernel asynchronous I/O system calls, important for the performance of databases and other advanced applications. Homepage: http://www.kernel.org/pub/linux/libs/aio/ Package: libsemanage1 Status: install ok installed Priority: optional Section: libs Installed-Size: 245 Maintainer: Debian SELinux maintainers Architecture: amd64 Multi-Arch: same Source: libsemanage (2.3-1) Version: 2.3-1+b1 Depends: libsemanage-common (= 2.3-1), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.14), libselinux1 (>= 2.1.12), libsepol1 (>= 2.1.4), libustr-1.0-1 (>= 1.0.4) Pre-Depends: multiarch-support Description: SELinux policy management library This package provides the shared libraries for SELinux policy management. It uses libsepol for binary policy manipulation and libselinux for interacting with the SELinux system. It also exec's helper programs for loading policy and for checking whether the file_contexts configuration is valid (load_policy and setfiles from policycoreutils) presently, although this may change at least for the bootstrapping case . Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement, Role-based Access Control, and Multi-level Security. Homepage: http://userspace.selinuxproject.org/ Package: libdb5.1 Status: deinstall ok config-files Priority: standard Section: libs Installed-Size: 1601 Maintainer: Debian Berkeley DB Group Architecture: amd64 Multi-Arch: same Source: db Version: 5.1.29-5 Config-Version: 5.1.29-5 Depends: libc6 (>= 2.4) Pre-Depends: multiarch-support Description: Berkeley v5.1 Database Libraries [runtime] This is the runtime package for programs that use the v5.1 Berkeley database library. Homepage: http://www.oracle.com/technology/software/products/berkeley-db/index.html Package: ntpdate Status: install ok installed Priority: optional Section: net Installed-Size: 228 Maintainer: Debian NTP Team Architecture: amd64 Source: ntp Version: 1:4.2.6.p5+dfsg-7+deb8u1 Depends: netbase, libc6 (>= 2.17), libssl1.0.0 (>= 1.0.0) Pre-Depends: dpkg (>= 1.15.7.2) Recommends: lockfile-progs Breaks: dhcp3-client (<< 4.1.0-1) Conffiles: /etc/default/ntpdate 71d857cae72ae1f53380ea4f2e38cb2e /etc/dhcp/dhclient-exit-hooks.d/ntpdate 1d4c6af64ca132451ee95a08686ea111 /etc/logcheck/ignore.d.server/ntpdate 68d4df7cceb0e97bde87126c3a56b219 /etc/network/if-up.d/ntpdate 78a5839e440618260d20d0bcecf05ada Description: client for setting system time from NTP servers NTP, the Network Time Protocol, is used to keep computer clocks accurate by synchronizing them over the Internet or a local network, or by following an accurate hardware receiver that interprets GPS, DCF-77, NIST or similar time signals. . ntpdate is a simple NTP client that sets a system's clock to match the time obtained by communicating with one or more NTP servers. It is not sufficient, however, for maintaining an accurate clock in the long run. ntpdate by itself is useful for occasionally setting the time on machines that do not have full-time network access, such as laptops. . If the full NTP daemon from the package "ntp" is installed, then ntpdate is not necessary. Homepage: http://support.ntp.org/ Package: libatm1 Status: install ok installed Priority: optional Section: libs Installed-Size: 127 Maintainer: Peter De Schrijver (p2) Architecture: amd64 Multi-Arch: same Source: linux-atm Version: 1:2.5.1-1.5 Depends: libc6 (>= 2.7) Pre-Depends: multiarch-support Conflicts: atm-tools (<< 2.4.1-6) Description: shared library for ATM (Asynchronous Transfer Mode) Shared libraries needed by ATM (Asynchronous Transfer Mode) related programs Homepage: http://linux-atm.sourceforge.net/ Package: sysvinit Status: install ok installed Priority: optional Section: admin Installed-Size: 122 Maintainer: Debian sysvinit maintainers Architecture: amd64 Version: 2.88dsf-59 Depends: libc6 (>= 2.15), libselinux1 (>= 1.32), libsepol1 (>= 1.14) Pre-Depends: init Description: System-V-like init utilities - transitional package This package depends on init, which is an essential package that pulls in the default init system. Starting with jessie, this will be systemd on Linux. It facilitates a smooth transition and provides a fallback SysV init binary which can be used to boot the system via the init=/lib/sysvinit/init kernel command line parameter in case the system fails to start after the switch to systemd. . If your system successfully boots with systemd or if you have chosen to stick with sysvinit-core, this package can be removed safely. Homepage: http://savannah.nongnu.org/projects/sysvinit Package: python-mysqldb Status: install ok installed Priority: optional Section: python Installed-Size: 192 Maintainer: Debian Python Modules Team Architecture: amd64 Version: 1.2.3-2.1 Replaces: python2.3-mysqldb, python2.4-mysqldb Provides: python2.7-mysqldb Depends: python (>= 2.7), python (<< 2.8), libc6 (>= 2.4), libmysqlclient18 (>= 5.5.24+dfsg-1), zlib1g (>= 1:1.1.4) Suggests: python-egenix-mxdatetime, mysql-server-5.1 | mysql-server, python-mysqldb-dbg Conflicts: python2.3-mysqldb, python2.4-mysqldb Description: Python interface to MySQL MySQLdb is an interface to the popular MySQL database server for Python. The design goals are: . + Compliance with Python database API version 2.0 + Thread-safety + Thread-friendliness (threads will not block each other) + Compatibility with MySQL-3.23 and later . This package contains modules for all Python versions supported in Debian. Homepage: http://mysql-python.sourceforge.net/ Python-Version: 2.7 Package: udev Status: install ok installed Priority: important Section: admin Installed-Size: 6048 Maintainer: Debian systemd Maintainers Architecture: amd64 Multi-Arch: foreign Source: systemd Version: 215-17+deb8u2 Depends: libacl1 (>= 2.2.51-8), libblkid1 (>= 2.19.1), libc6 (>= 2.17), libkmod2 (>= 5~), libselinux1 (>= 2.0.65), libudev1 (= 215-17+deb8u2), adduser, lsb-base (>= 3.0-6), util-linux (>= 2.16), procps Pre-Depends: debconf (>= 1.4.69) | debconf-2.0 Breaks: consolekit (<< 0.4.6-1), kmod (<< 14), plymouth (<< 0.9.0-7), systemd (<< 215-1) Conffiles: /etc/init.d/udev 988e81a81706a99e7f4b83988b386b00 /etc/init.d/udev-finish fd3ce194c134bcd790681ea487b19126 /etc/init/udev-fallback-graphics.conf b8bfe7164e10cd0e53494b243c5728b1 /etc/init/udev-finish.conf 089140a32d519840674be9a274da1a42 /etc/init/udev.conf 41c0081f3a830e0902aaff76a53edf98 /etc/init/udevmonitor.conf b541dfb5aa4958e9a5336ecaec00ca15 /etc/init/udevtrigger.conf 651ff2421dde80be7ce7ccbf7fa8cf18 /etc/modprobe.d/fbdev-blacklist.conf 0b9c466830040ec52986cc3ea117bef5 /etc/udev/udev.conf ae415f84e2967eff580089fb08aa0a61 Description: /dev/ and hotplug management daemon udev is a daemon which dynamically creates and removes device nodes from /dev/, handles hotplug events and loads drivers at boot time. Homepage: http://www.freedesktop.org/wiki/Software/systemd Package: libnettle4 Status: install ok installed Priority: optional Section: libs Installed-Size: 331 Maintainer: Magnus Holmgren Architecture: amd64 Multi-Arch: same Source: nettle Version: 2.7.1-5 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: low level cryptographic library (symmetric and one-way cryptos) Nettle is a cryptographic library that is designed to fit easily in more or less any context: In crypto toolkits for object-oriented languages (C++, Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel space. . It tries to solve a problem of providing a common set of cryptographic algorithms for higher-level applications by implementing a context-independent set of cryptographic algorithms. In that light, Nettle doesn't do any memory allocation or I/O, it simply provides the cryptographic algorithms for the application to use in any environment and in any way it needs. . This package contains the symmetric and one-way cryptographic algorithms. To avoid having this package depend on libgmp, the asymmetric cryptos reside in a separate library, libhogweed. Homepage: http://www.lysator.liu.se/~nisse/nettle/ Package: libapparmor1 Status: install ok installed Priority: extra Section: libs Installed-Size: 97 Maintainer: Debian AppArmor Team Architecture: amd64 Multi-Arch: same Source: apparmor Version: 2.9.0-3 Depends: libc6 (>= 2.14) Description: changehat AppArmor library This package provides the shared library used for making use of the AppArmor profile and changehat functionality, as well as common log parsing routines. Homepage: http://apparmor.net/ Package: iptables Status: install ok installed Priority: important Section: net Installed-Size: 3557 Maintainer: Laurence J. Lane Architecture: amd64 Source: iptables (1.4.21-2) Version: 1.4.21-2+b1 Depends: libc6 (>= 2.15), libnfnetlink0, libxtables10 (= 1.4.21-2+b1) Description: administration tools for packet filtering and NAT iptables is the userspace command line program used to configure the Linux packet filtering ruleset. It is targeted towards system administrators. Since Network Address Translation is also configured from the packet filter ruleset, iptables is used for this, too. The iptables package also includes ip6tables. ip6tables is used for configuring the IPv6 packet filter Homepage: http://www.netfilter.org/ Package: w3m Status: install ok installed Priority: standard Section: web Installed-Size: 2156 Maintainer: Tatsuya Kinoshita Architecture: amd64 Multi-Arch: foreign Version: 0.5.3-19 Replaces: w3m-ssl, w3mmee Provides: www-browser Depends: libc6 (>= 2.15), libgc1c2 (>= 1:7.2d), libgpm2 (>= 1.20.4), libssl1.0.0 (>= 1.0.0), libtinfo5, zlib1g (>= 1:1.1.4) Recommends: ca-certificates Suggests: w3m-img, mime-support, w3m-el, man-db, cmigemo Conflicts: w3m-ssl Conffiles: /etc/w3m/config e87f310b0ed88dc2a115d35397949cb6 /etc/w3m/mailcap fe00c489702ba1bd12a5b40d580600fa Description: WWW browsable pager with excellent tables/frames support w3m is a text-based World Wide Web browser with IPv6 support. It features excellent support for tables and frames. It can be used as a standalone file pager, too. . * You can follow links and/or view images in HTML. * Internet message preview mode, you can browse HTML mail. * You can follow links in plain text if it includes URL forms. * With w3m-img, you can view inline images. Homepage: http://sourceforge.net/projects/w3m/ Package: libldap-2.4-2 Status: install ok installed Priority: standard Section: libs Installed-Size: 471 Maintainer: Debian OpenLDAP Maintainers Architecture: amd64 Multi-Arch: same Source: openldap Version: 2.4.40+dfsg-1+deb8u1 Replaces: libldap-2.3-0, libldap2 Depends: libc6 (>= 2.14), libgnutls-deb0-28 (>= 3.3.0), libsasl2-2 Pre-Depends: multiarch-support Conflicts: ldap-utils (<= 2.1.23-1) Conffiles: /etc/ldap/ldap.conf 0b3f4d19d88498314478273ce10b0a70 Description: OpenLDAP libraries These are the run-time libraries for the OpenLDAP (Lightweight Directory Access Protocol) servers and clients. Homepage: http://www.openldap.org/ Package: librbl1 Status: install ok installed Priority: extra Section: libs Installed-Size: 83 Maintainer: Mike Markley Architecture: amd64 Source: opendkim Version: 2.9.2-2 Depends: libbsd0 (>= 0.0), libc6 (>= 2.4) Description: Library to support a DKIM based RBL system The OpenDKIM Project is a community effort to develop and maintain a C library for producing DKIM-aware applications and an open source milter for providing DomainKeys Identified Mail (DKIM) service. . This package provides library for implementing OpenDKIM's RBL system. Homepage: http://www.opendkim.org/ Package: liburi-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 229 Maintainer: Debian Perl Group Architecture: all Version: 1.64-1 Depends: perl, libnet-perl Suggests: libwww-perl Description: module to manipulate and access URI strings URI is a collection of Perl modules that represent and manipulate Uniform Resource Identifier (URI) references as specified in RFC 2396. . URI objects can be used to access and manipulate the various components that make up these strings. There are also methods to combine URIs in various ways. . The URI class replaces the URI::URL class that used to be distributed with libwww-perl. This package also includes an emulation of the old URI::URL interface, which implements both the old and the new interface. Homepage: https://metacpan.org/release/URI Package: kbd Status: install ok installed Priority: optional Section: utils Installed-Size: 1537 Maintainer: Console utilities maintainers Architecture: amd64 Version: 1.15.5-2 Provides: console-utilities Depends: libc6 (>= 2.14), lsb-base (>= 3.0-10) Recommends: console-setup | console-data Conflicts: console-utilities Conffiles: /etc/init.d/kbd 7742d1e18a9cb625f9c838668fa1ab4e /etc/kbd/config 7675e7d682fcc2633d00990fc1a38c29 /etc/kbd/remap 2f1f15d62b45ab43c04b3ddbfcf591ec Description: Linux console font and keytable utilities This package allows you to set up the Linux console, change the font, resize text mode virtual consoles and remap the keyboard. . You will probably want to install a set of data files, such as the one in the “console-data” package. Package: php5-readline Status: install ok installed Priority: optional Section: php Installed-Size: 35 Maintainer: Debian PHP Maintainers Architecture: amd64 Source: php5 Version: 5.6.14+dfsg-0+deb8u1 Depends: libc6 (>= 2.14), libedit2 (>= 3.1-20130611), libtinfo5, phpapi-20131226, php5-common (= 5.6.14+dfsg-0+deb8u1), php5-cli (= 5.6.14+dfsg-0+deb8u1), ucf Description: Readline module for php5 This package provides a module for readline functions (based on libedit) in PHP scripts. . PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used open source general-purpose scripting language that is especially suited for web development and can be embedded into HTML. Homepage: http://www.php.net/ Package: sysvinit-utils Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 147 Maintainer: Debian sysvinit maintainers Architecture: amd64 Source: sysvinit Version: 2.88dsf-59 Replaces: last, sysvinit (<= 2.86.ds1-65) Depends: libc6 (>= 2.14), libselinux1 (>= 1.32), startpar Suggests: bootlogd, sash Breaks: upstart (<< 1.5-0ubuntu5) Conflicts: chkconfig (<< 11.0-79.1-2), last, startpar (<< 0.58-2), sysvconfig Conffiles: /etc/init/startpar-bridge.conf aab4f8aed4d4803ba1f6d97f6b1152da obsolete Description: System-V-like utilities This package contains the important System-V-like utilities. . Specifically, this package includes: killall5, last, lastb, mesg, pidof, service, sulogin Homepage: http://savannah.nongnu.org/projects/sysvinit Package: xz-utils Status: install ok installed Priority: required Section: utils Installed-Size: 472 Maintainer: Jonathan Nieder Architecture: amd64 Multi-Arch: foreign Source: xz-utils (5.1.1alpha+20120614-2) Version: 5.1.1alpha+20120614-2+b3 Replaces: lzip (<< 1.8~rc2), xz-lzma Provides: lzma Depends: libc6 (>= 2.14), liblzma5 (>= 5.1.1alpha+20120614) Breaks: lzip (<< 1.8~rc2) Conflicts: lzma (<< 9.22-1), xz-lzma Description: XZ-format compression utilities XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm compression format, which provides memory-hungry but powerful compression (often better than bzip2) and fast, easy decompression. . This package provides the command line tools for working with XZ compression, including xz, unxz, xzcat, xzgrep, and so on. They can also handle the older LZMA format, and if invoked via appropriate symlinks will emulate the behavior of the commands in the lzma package. . The XZ format is similar to the older LZMA format but includes some improvements for general use: . * 'file' magic for detecting XZ files; * crc64 data integrity check; * limited random-access reading support; * improved support for multithreading (not used in xz-utils); * support for flushing the encoder. Homepage: http://tukaani.org/xz/ Package: debian-archive-keyring Status: install ok installed Priority: important Section: misc Installed-Size: 108 Maintainer: Debian Release Team Architecture: all Multi-Arch: foreign Version: 2014.3 Depends: gpgv Recommends: gnupg Breaks: apt (<< 0.7.25.1) Conffiles: /etc/apt/trusted.gpg.d/debian-archive-jessie-automatic.gpg 548a861c55fdf06fb9b0419c30cd33ec /etc/apt/trusted.gpg.d/debian-archive-jessie-security-automatic.gpg 28ffc0824518a9d42fb40e5caad7c5ef /etc/apt/trusted.gpg.d/debian-archive-jessie-stable.gpg 3cf5c69a2532cc3a3cba6c5bcf02cb7b /etc/apt/trusted.gpg.d/debian-archive-squeeze-automatic.gpg 342e9f6a4bd60ac4e3f1fe74dc46e844 /etc/apt/trusted.gpg.d/debian-archive-squeeze-stable.gpg 2e662da7572ee5fe2e921c7b1de6e564 /etc/apt/trusted.gpg.d/debian-archive-wheezy-automatic.gpg e5d3c1f7461bc12685f9b331c60beadd /etc/apt/trusted.gpg.d/debian-archive-wheezy-stable.gpg 722258fff5af68c002429c4433bd228b Description: GnuPG archive keys of the Debian archive The Debian project digitally signs its Release files. This package contains the archive keys used for that. Package: task-english Status: install ok installed Priority: optional Section: tasks Installed-Size: 21 Maintainer: Debian Install System Team Architecture: all Source: tasksel Version: 3.31+deb8u1 Depends: tasksel (= 3.31+deb8u1), locales Recommends: util-linux-locales, ibritish, iamerican Description: General English environment This task installs packages and documentation in British and American English to help English speaking people use Debian. Package: libtext-iconv-perl Status: install ok installed Priority: required Section: perl Installed-Size: 92 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Source: libtext-iconv-perl (1.7-5) Version: 1.7-5+b2 Depends: libc6 (>= 2.2.5), perl-base (>= 5.20.0-4), perlapi-5.20.0 Description: converts between character sets in Perl The iconv() family of functions from XPG4 defines an API for converting between character sets (e.g. UTF-8 to Latin1, EBCDIC to ASCII). They are provided by libc6. . This package allows access to them from Perl via the Text::Iconv package. Homepage: http://search.cpan.org/search?module=Text::Iconv Package: python2.6 Status: deinstall ok config-files Priority: standard Section: python Installed-Size: 8249 Maintainer: Matthias Klose Architecture: amd64 Version: 2.6.8-1.1 Config-Version: 2.6.8-1.1 Replaces: python-profiler (<= 2.7.1-2) Provides: python2.6-celementtree, python2.6-cjkcodecs, python2.6-ctypes, python2.6-elementtree, python2.6-profiler, python2.6-wsgiref Depends: python2.6-minimal (= 2.6.8-1.1), mime-support, libbz2-1.0, libc6 (>= 2.3), libdb5.1, libexpat1 (>= 2.1~beta3), libncursesw5 (>= 5.6+20070908), libreadline6 (>= 6.0), libsqlite3-0 (>= 3.5.9), libtinfo5 Suggests: python2.6-doc, binutils Conflicts: python-profiler (<= 2.7.1-2) Description: Interactive high-level object-oriented language (version 2.6) Version 2.6 of the high-level, interactive object oriented language, includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. Package: telnet Status: install ok installed Priority: standard Section: net Installed-Size: 200 Maintainer: Alberto Gonzalez Iniesta Architecture: amd64 Source: netkit-telnet Version: 0.17-36 Replaces: netstd Provides: telnet-client Depends: netbase, libc6 (>= 2.7-1), libgcc1 (>= 1:4.1.1), libncurses5 (>= 5.6+20071006-3), libstdc++6 (>= 4.1.1) Description: The telnet client The telnet command is used for interactive communication with another host using the TELNET protocol. Package: libaprutil1 Status: install ok installed Priority: optional Section: libs Installed-Size: 264 Maintainer: Debian Apache Maintainers Architecture: amd64 Multi-Arch: same Source: apr-util Version: 1.5.4-1 Depends: libapr1 (>= 1.4.8-2~), libc6 (>= 2.14), libdb5.3, libexpat1 (>= 2.0.1), libssl1.0.0 (>= 1.0.0), libuuid1 (>= 2.16) Pre-Depends: multiarch-support Breaks: libapr1 (<< 1.4.8-2~) Description: Apache Portable Runtime Utility Library APR is Apache's Portable Runtime Library, designed to be a support library that provides a predictable and consistent interface to underlying platform-specific implementations. . APR Util is a utilities library implemented on top of apr, providing database access, xml parsing, and other useful functionality. Homepage: http://apr.apache.org/ Package: libapt-inst1.5 Status: install ok installed Priority: important Section: libs Installed-Size: 725 Maintainer: APT Development Team Architecture: amd64 Multi-Arch: same Source: apt Version: 1.0.9.8.1 Depends: libapt-pkg4.12 (>= 0.8.16~exp9), libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.4.0) Pre-Depends: multiarch-support Description: deb package format runtime library This library provides methods to query and extract information from deb packages. This includes the control data and the package file content. Package: libisl10 Status: install ok installed Priority: optional Section: libs Installed-Size: 1417 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: isl Version: 0.12.2-2 Depends: libc6 (>= 2.14), libgmp10 Pre-Depends: multiarch-support Breaks: libcloog-isl4 (<< 0.18.1) Description: manipulating sets and relations of integer points bounded by linear constraints isl is a library for manipulating sets and relations of integer points bounded by linear constraints. Supported operations on sets include intersection, union, set difference, emptiness check, convex hull, (integer) affine hull, integer projection, and computing the lexicographic minimum using parametric integer programming. It also includes an ILP solver based on generalized basis reduction. . This package contains the runtime library. Homepage: http://freecode.com/projects/isl Package: python3-virtualenv Status: install ok installed Priority: optional Section: python Installed-Size: 181 Maintainer: Debian Python Modules Team Architecture: all Source: python-virtualenv Version: 1.11.6+ds-1 Depends: python-pip-whl, python-setuptools-whl, python3, python3-pkg-resources, python3:any (>= 3.3.2-2~) Description: Python virtual environment creator The virtualenv utility creates virtual Python instances, each invokable with its own Python executable. Each instance can have different sets of modules, installable via easy_install. Virtual Python instances can also be created without root access. . This is the Python 3 version of the library. Homepage: http://pypi.python.org/pypi/virtualenv Package: dc Status: install ok installed Priority: standard Section: math Installed-Size: 168 Maintainer: Ryan Kavanagh Architecture: amd64 Multi-Arch: foreign Source: bc Version: 1.06.95-9 Depends: libc6 (>= 2.14) Description: GNU dc arbitrary precision reverse-polish calculator GNU dc is a reverse-polish desk calculator which supports unlimited precision arithmetic. It also allows you to define and call macros. . A reverse-polish calculator stores numbers on a stack. Entering a number pushes it on the stack. Arithmetic operations pop arguments off the stack and push the results. Homepage: http://ftp.gnu.org/gnu/bc/ Package: libtext-wrapi18n-perl Status: install ok installed Priority: required Section: perl Installed-Size: 28 Maintainer: Anibal Monsalve Salazar Architecture: all Version: 0.06-7 Depends: libtext-charwidth-perl Description: internationalized substitute of Text::Wrap This module is a substitution for Text::Wrap, supporting multibyte characters such as UTF-8, EUC-JP, and GB2312, fullwidth characters such as east Asian characters, combining characters such as diacritical marks and Thai, and languages which don't use whitespaces between words such as Chinese and Japanese. . It provides wrap(). Homepage: http://search.cpan.org/search?module=Text::WrapI18N Package: libsemanage-common Status: install ok installed Priority: optional Section: libs Installed-Size: 65 Maintainer: Debian SELinux maintainers Architecture: all Multi-Arch: foreign Source: libsemanage Version: 2.3-1 Replaces: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~) Breaks: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~) Conffiles: /etc/selinux/semanage.conf e69d42a4d98a93c3b8e201bdda367c55 Description: Common files for SELinux policy management libraries This package provides the common files used by the shared libraries for SELinux policy management. . Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement, Role-based Access Control, and Multi-level Security. Homepage: http://userspace.selinuxproject.org/ Package: libp11-kit0 Status: install ok installed Priority: standard Section: libs Installed-Size: 299 Maintainer: Debian GnuTLS Maintainers Architecture: amd64 Multi-Arch: same Source: p11-kit Version: 0.20.7-1 Depends: libc6 (>= 2.16), libffi6 (>= 3.0.4) Pre-Depends: multiarch-support Description: Library for loading and coordinating access to PKCS#11 modules - runtime Provides a way to load and enumerate PKCS#11 modules. Provides a standard configuration setup for installing PKCS#11 modules in such a way that they're discoverable. . Also solves problems with coordinating the use of PKCS#11 by different components or libraries living in the same process. . This package contains the shared library required for applications loading and accessing PKCS#11 modules. Homepage: http://p11-glue.freedesktop.org/p11-kit.html Package: python3-minimal Status: install ok installed Priority: optional Section: python Installed-Size: 96 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: allowed Source: python3-defaults Version: 3.4.2-2 Replaces: python3 (<< 3.3.2-13~), python3.1 (<< 3.1-2) Depends: python3.4-minimal (>= 3.4.2-0), dpkg (>= 1.13.20) Breaks: idle3 (<< 3.1), python3 (<< 3.3.2-13~), python3-all (<< 3.1), python3-all-dbg (<< 3.1), python3-all-dev (<< 3.1), python3-dbg (<< 3.1), python3-dev (<< 3.1), python3-examples (<< 3.1) Description: minimal subset of the Python language (default python3 version) This package contains the interpreter and some essential modules. It's used in the boot process for some basic tasks. See /usr/share/doc/python3.4-minimal/README.Debian for a list of the modules contained in this package. Homepage: http://www.python.org/ Package: libgnutls-openssl27 Status: install ok installed Priority: standard Section: libs Installed-Size: 205 Maintainer: Debian GnuTLS Maintainers Architecture: amd64 Multi-Arch: same Source: gnutls28 Version: 3.3.8-6+deb8u3 Depends: libgnutls-deb0-28 (= 3.3.8-6+deb8u3), libc6 (>= 2.14) Pre-Depends: multiarch-support Description: GNU TLS library - OpenSSL wrapper GnuTLS is a portable library which implements the Transport Layer Security (TLS 1.0, 1.1, 1.2) and Secure Sockets Layer (SSL) 3.0 and Datagram Transport Layer Security (DTLS 1.0, 1.2) protocols. . GnuTLS features support for: - TLS extensions: server name indication, max record size, opaque PRF input, etc. - authentication using the SRP protocol. - authentication using both X.509 certificates and OpenPGP keys. - TLS Pre-Shared-Keys (PSK) extension. - Inner Application (TLS/IA) extension. - X.509 and OpenPGP certificate handling. - X.509 Proxy Certificates (RFC 3820). - all the strong encryption algorithms (including SHA-256/384/512 and Camellia (RFC 4132)). . This package contains the runtime library of the GnuTLS OpenSSL wrapper. Homepage: http://www.gnutls.org/ Package: libopendbx1 Status: install ok installed Priority: optional Section: libs Installed-Size: 139 Maintainer: Debian OpenDBX Maintainers Architecture: amd64 Source: libopendbx Version: 1.4.6-8 Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1) Recommends: libopendbx1-sqlite3 | libopendbx1-backend Description: Lightweight database access abstraction layer OpenDBX provides a simple and lightweight API for interfacing native relational database APIs in a consistent way. By using the OpenDBX API you don't have to adapt your program to the different database APIs by yourself. . The sqlite3 backend is recommended by default if no other backend is installed with libopendbx1 Homepage: http://www.linuxnetworks.de/doc/index.php/OpenDBX Package: libdebconfclient0 Status: install ok installed Priority: optional Section: libs Installed-Size: 53 Maintainer: Debian Install System Team Architecture: amd64 Multi-Arch: same Source: cdebconf Version: 0.192 Depends: libc6 (>= 2.2.5) Pre-Depends: multiarch-support Description: Debian Configuration Management System (C-implementation library) Debconf is a configuration management system for Debian packages. It is used by some packages to prompt you for information before they are installed. This is a reimplementation of the original debconf version in C. . This is the libraries needed by libdebconfclient-dev and cdebconf. Package: libgnutls-deb0-28 Status: install ok installed Priority: standard Section: libs Installed-Size: 1959 Maintainer: Debian GnuTLS Maintainers Architecture: amd64 Multi-Arch: same Source: gnutls28 Version: 3.3.8-6+deb8u3 Replaces: gnutls0, gnutls0.4, gnutls3 Depends: libc6 (>= 2.17), libgmp10 (>= 2:6), libhogweed2 (>= 2.7), libnettle4 (>= 2.7), libp11-kit0 (>= 0.20.7), libtasn1-6 (>= 4.1-0), zlib1g (>= 1:1.1.4) Pre-Depends: multiarch-support Suggests: gnutls-bin Conflicts: gnutls0, gnutls0.4 Description: GNU TLS library - main runtime library GnuTLS is a portable library which implements the Transport Layer Security (TLS 1.0, 1.1, 1.2) and Secure Sockets Layer (SSL) 3.0 and Datagram Transport Layer Security (DTLS 1.0, 1.2) protocols. . GnuTLS features support for: - TLS extensions: server name indication, max record size, opaque PRF input, etc. - authentication using the SRP protocol. - authentication using both X.509 certificates and OpenPGP keys. - TLS Pre-Shared-Keys (PSK) extension. - Inner Application (TLS/IA) extension. - X.509 and OpenPGP certificate handling. - X.509 Proxy Certificates (RFC 3820). - all the strong encryption algorithms (including SHA-256/384/512 and Camellia (RFC 4132)). . This package contains the main runtime library. Homepage: http://www.gnutls.org/ Package: libselinux1 Status: install ok installed Priority: required Section: libs Installed-Size: 213 Maintainer: Debian SELinux maintainers Architecture: amd64 Multi-Arch: same Source: libselinux Version: 2.3-2 Depends: libc6 (>= 2.14), libpcre3 (>= 8.10) Pre-Depends: multiarch-support Description: SELinux runtime shared libraries This package provides the shared libraries for Security-enhanced Linux that provides interfaces (e.g. library functions for the SELinux kernel APIs like getcon(), other support functions like getseuserbyname()) to SELinux-aware applications. Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement, Role-based Access Control, and Multi-level Security. . libselinux1 provides an API for SELinux applications to get and set process and file security contexts and to obtain security policy decisions. Required for any applications that use the SELinux API. libselinux may use the shared libsepol to manipulate the binary policy if necessary (e.g. to downgrade the policy format to an older version supported by the kernel) when loading policy. Homepage: http://userspace.selinuxproject.org/ Package: systemd Status: install ok installed Priority: optional Section: admin Installed-Size: 13838 Maintainer: Debian systemd Maintainers Architecture: amd64 Version: 215-17+deb8u2 Depends: libacl1 (>= 2.2.51-8), libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.19.1), libcap2 (>= 1:2.10), libcryptsetup4 (>= 2:1.4.3), libkmod2 (>= 5~), libpam0g (>= 0.99.7.1), libselinux1 (>= 2.1.9), libsystemd0 (= 215-17+deb8u2), util-linux (>= 2.19.1-2), mount (>= 2.21), initscripts (>= 2.88dsf-53.2), sysv-rc, udev (>= 208-8), acl, adduser, libcap2-bin Pre-Depends: libc6 (>= 2.17), libgcrypt20 (>= 1.6.1), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 1.32) Recommends: libpam-systemd, dbus Suggests: systemd-ui Breaks: lsb-base (<< 4.1+Debian4), lvm2 (<< 2.02.104-1), systemd-shim (<< 8-2) Conflicts: klogd Conffiles: /etc/dbus-1/system.d/org.freedesktop.hostname1.conf f55c94d000b5d62b5f06d38852977dd1 /etc/dbus-1/system.d/org.freedesktop.locale1.conf 5893ab03e7e96aa3759baceb4dd04190 /etc/dbus-1/system.d/org.freedesktop.login1.conf 96bf488f3da8f0ca813cc78e71eeb605 /etc/dbus-1/system.d/org.freedesktop.machine1.conf d658acaf7192de735ab798c58ab149ae /etc/dbus-1/system.d/org.freedesktop.systemd1.conf 46533268285a0df22b1f1667ddc05642 /etc/dbus-1/system.d/org.freedesktop.timedate1.conf 682369fbf3de26b21e775732c89a2bbe /etc/pam.d/systemd-user aebb8b8a2c698614b00961f327a683ef /etc/systemd/bootchart.conf 838a83315ad2f9d4c4b7f20b7475ba28 /etc/systemd/journald.conf 51f19202dcc5aff6d2c3448dbf92f354 /etc/systemd/logind.conf 747ae2312b6922546190bf806d8d12be /etc/systemd/resolved.conf 81a9c57d4eb587decc49040595674c5a /etc/systemd/system.conf 3d0e13a72d72acb55409a831b72a15e6 /etc/systemd/timesyncd.conf 605e4f25097b8ea22f2f5cb3fde3f13c /etc/systemd/user.conf 9eaad8fbb7bb6230d4b28abb76b4e81c Description: system and service manager systemd is a replacement for sysvinit. It is dependency-based and able to read the LSB init script headers in addition to parsing rcN.d links as hints. . It also provides process supervision using cgroups and the ability to not only depend on other init script being started, but also availability of a given mount point or dbus service. . Installing the systemd package will not switch your init system unless you boot with init=/bin/systemd or install systemd-sysv in addition. Homepage: http://www.freedesktop.org/wiki/Software/systemd Package: mtr-tiny Status: install ok installed Priority: optional Section: net Installed-Size: 123 Maintainer: Robert Woodcock Architecture: amd64 Source: mtr Version: 0.85-3 Replaces: mtr Depends: libc6 (>= 2.4), libncurses5 (>= 5.5-5~), libtinfo5 Conflicts: mtr, suidmanager (<< 0.50) Description: Full screen ncurses traceroute tool mtr combines the functionality of the 'traceroute' and 'ping' programs in a single network diagnostic tool. . As mtr starts, it investigates the network connection between the host mtr runs on and a user-specified destination host. After it determines the address of each network hop between the machines, it sends a sequence ICMP ECHO requests to each one to determine the quality of the link to each machine. As it does this, it prints running statistics about each machine. . mtr-tiny is compiled without support for X and conserves disk space. Homepage: http://www.bitwizard.nl/mtr/ Package: libhtml-parser-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 207 Maintainer: Debian Perl Group Architecture: amd64 Source: libhtml-parser-perl (3.71-1) Version: 3.71-1+b3 Depends: perl (>= 5.20.1-1), perlapi-5.20.1, libc6 (>= 2.4), liburi-perl, libhtml-tagset-perl Suggests: libdata-dump-perl Enhances: libwww-perl Description: collection of modules that parse HTML text documents HTML::Parser is a collection of modules useful for handling HTML documents. These modules used to be part of the libwww-perl distribution, but are now unbundled in order to facilitate a separate development track. . Objects of the HTML::Parser class will recognize markup and separate it from content data. As different kinds of markup are recognized, the corresponding event handler is invoked. The document to be parsed may also be supplied in arbitrary chunks, making on-the-fly parsing of network documents possible. Homepage: https://metacpan.org/release/HTML-Parser/ Package: libxml-parser-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 605 Maintainer: Debian Perl Group Architecture: amd64 Version: 2.41-3 Depends: perl (>= 5.20.0-6), perlapi-5.20.0, libc6 (>= 2.14), libexpat1 (>= 2.0.1), liburi-perl, libwww-perl Description: Perl module for parsing XML files The XML::Parser module provides ways to parse XML documents. It is built on top of XML::Parser::Expat, which is a lower level interface to James Clark's expat library. Each call to one of the parsing methods creates a new instance of XML::Parser::Expat which is then used to parse the document. Expat options may be provided when the XML::Parser object is created. These options are then passed on to the Expat object on each parse call. They can also be given as extra arguments to the parse methods, in which case they override options given at XML::Parser creation time. . The behavior of the parser is controlled either by Style and/or Handlers options, or by setHandlers method. These all provide mechanisms for XML::Parser to set the handlers needed by XML::Parser::Expat. If neither Style nor Handlers are specified, then parsing just checks the document for being well-formed. . When underlying handlers get called, they receive as their first parameter the Expat object, not the Parser object. Homepage: http://www.libexpat.org/ Package: libpython2.7 Status: install ok installed Priority: standard Section: libs Installed-Size: 3568 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: same Source: python2.7 Version: 2.7.9-2 Replaces: python2.7 (<< 2.6) Depends: libpython2.7-stdlib (= 2.7.9-2), libc6 (>= 2.15), zlib1g (>= 1:1.2.0) Pre-Depends: multiarch-support Description: Shared Python runtime library (version 2.7) Python is a high-level, interactive, object-oriented language. Its 2.7 version includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package contains the shared runtime library, normally not needed for programs using the statically linked interpreter. Package: dpkg Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 7197 Origin: debian Maintainer: Dpkg Developers Bugs: debbugs://bugs.debian.org Architecture: amd64 Multi-Arch: foreign Version: 1.17.26 Replaces: manpages-it (<< 2.80-4) Pre-Depends: libbz2-1.0, libc6 (>= 2.14), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 2.3), zlib1g (>= 1:1.1.4), tar (>= 1.23) Suggests: apt Breaks: apt (<< 0.7.7~), apt-cudf (<< 3.3~beta1-3~), aptitude (<< 0.4.7-1~), auctex (<< 11.87-3+deb8u1~), ccache (<< 3.1.10-1~), cups (<< 1.7.5-10~), debian-security-support (<< 2014.10.26~), distcc (<< 3.1-6.1~), doc-base (<< 0.10.5~), dpkg-dev (<< 1.15.8), fontconfig (<< 2.11.0-6.2~), fusionforge-plugin-mediawiki (<< 5.3.2+20141104-3~), gap-core (<< 4r7p5-2~), gitweb (<< 1:2.1.4-2.1~), grace (<< 1:5.1.24-3~), gxine (<< 0.5.908-3.1~), hoogle (<< 4.2.33-4~), icecc (<< 1.0.1-2~), install-info (<< 5.1.dfsg.1-3~), libapache2-mod-php5 (<< 5.6.4+dfsg-3~), libapache2-mod-php5filter (<< 5.6.4+dfsg-3~), libdpkg-perl (<< 1.15.8), libjs-protoaculous (<< 5~), man-db (<< 2.6.3-6~), mcollective (<< 2.6.0+dfsg-2.1~), php5-fpm (<< 5.6.4+dfsg-3~), pypy (<< 2.4.0+dfsg-3~), readahead-fedora (<< 2:1.5.6-5.2~), wordpress (<< 4.1+dfsg-1~), xfonts-traditional (<< 1.7~), xine-ui (<< 0.99.9-1.2~) Conflicts: ada-reference-manual (<< 20021112web-4~), asn1-mode (<< 2.7-7~), bogosort (<< 0.4.2-3~), cl-yacc (<< 0.3-3~), cpp-4.1-doc (<< 4.1.2.nf2-4~), cpp-4.2-doc (<< 4.2.4.nf1-4~), gcc-4.1-doc (<< 4.1.2.nf2-4~), gcc-4.2-doc (<< 4.2.4.nf1-4~), gcj-4.1-doc (<< 4.1.2.nf2-4~), gcj-4.2-doc (<< 4.2.4.nf1-4~), gfortran-4.1-doc (<< 4.1.2.nf2-4~), gfortran-4.2-doc (<< 4.2.4.nf1-4~), ggz-docs (<< 0.0.14.1-2~), glame (<< 2.0.1-6~), gnat-4.1-doc (<< 4.1.2.nf2-4~), gnat-4.2-doc (<< 4.2.4.nf1-4~), gtalk (<< 0.99.10-16~), libalogg-dev (<< 1.3.7-2~), libgtk1.2-doc (<< 1.2.10-19~), libnettle-dev (<< 2~), liborbit-dev (<< 0.5.17-12~), libreadline5-dev (<< 5.2-8~), librep-doc (<< 0.90~), mmucl (<< 1.5.2-3~), nxml-mode (<< 20041004-9~), octave3.0-info (<< 1:3.0.5-7+rm), octave3.2-info (<< 3.2.4-12+rm), polgen-doc (<< 1.3-3+rm), r6rs-doc (<< 1.0-2~), serveez-doc (<< 0.1.5-3~), slat (<< 2.0-6~), texlive-base-bin-doc (<< 2007.dfsg.2-9~), ttcn-el (<< 0.6.9-2~), ulog-acctd (<< 0.4.3-3~), xconq-doc (<< 7.4.1-5~), zenirc (<< 2.112.dfsg-1~) Conffiles: /etc/alternatives/README 69c4ba7f08363e998e0f2e244a04f881 /etc/cron.daily/dpkg b8065b6bfc248caba501c3f5bb508e66 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b /etc/logrotate.d/dpkg 782ea5ae536f67ff51dc8c3e2eeb4cf9 Description: Debian package management system This package provides the low-level infrastructure for handling the installation and removal of Debian software packages. . For Debian package development tools, install dpkg-dev. Homepage: https://wiki.debian.org/Teams/Dpkg Package: dovecot-imapd Status: install ok installed Priority: optional Section: mail Installed-Size: 976 Maintainer: Dovecot Maintainers Architecture: amd64 Source: dovecot Version: 1:2.2.13-12~deb8u1 Provides: imap-server Depends: dovecot-core (= 1:2.2.13-12~deb8u1), libbz2-1.0, libc6 (>= 2.4), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.1.4), ucf (>= 2.0020) Description: secure POP3/IMAP server - IMAP daemon Dovecot is a mail server whose major goals are security and extreme reliability. It tries very hard to handle all error conditions and verify that all data is valid, making it nearly impossible to crash. It supports mbox/Maildir and its own dbox/mdbox formats, and should also be pretty fast, extensible, and portable. . This package contains the Dovecot IMAP server. Homepage: http://dovecot.org/ Package: python3.4 Status: install ok installed Priority: optional Section: python Installed-Size: 336 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: allowed Version: 3.4.2-1 Depends: python3.4-minimal (= 3.4.2-1), libpython3.4-stdlib (= 3.4.2-1), mime-support Suggests: python3.4-venv, python3.4-doc, binutils Description: Interactive high-level object-oriented language (version 3.4) Python is a high-level, interactive, object-oriented language. Its 3.4 version includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. Package: docutils-doc Status: install ok installed Priority: optional Section: doc Installed-Size: 4068 Maintainer: Debian Python Modules Team Architecture: all Source: python-docutils Version: 0.12+dfsg-1 Replaces: python-docutils (<< 0.7-3~) Conflicts: python-docutils (<< 0.7-3~) Description: text processing system for reStructuredText - documentation reStructuredText is an easy-to-read, what-you-see-is-what-you-get plaintext markup syntax and parser system. It is useful for in-line program documentation (such as Python docstrings), for quickly creating simple web pages, and for standalone documents. . The purpose of the Docutils project is to create a set of tools for processing reStructuredText documentation into useful formats, such as HTML, LaTeX, ODT or Unix manpages. . This package includes documentation in HTML and (gzipped) reST formats. Homepage: http://docutils.sourceforge.net/ Package: ftp Status: install ok installed Priority: standard Section: net Installed-Size: 145 Maintainer: Alberto Gonzalez Iniesta Architecture: amd64 Source: netkit-ftp Version: 0.17-31 Replaces: netstd Depends: libc6 (>= 2.15), libreadline6 (>= 6.0), netbase Description: classical file transfer client This is the user interface to the ARPANET standard File Transfer Protocol. The program allows a user to transfer files to and from a remote network site. Package: openssl Status: install ok installed Priority: optional Section: utils Installed-Size: 1102 Maintainer: Debian OpenSSL Team Architecture: amd64 Version: 1.0.1k-3+deb8u2 Depends: libc6 (>= 2.15), libssl1.0.0 (>= 1.0.1) Suggests: ca-certificates Conffiles: /etc/ssl/openssl.cnf 7df26c55291b33344dc15e3935dabaf3 Description: Secure Sockets Layer toolkit - cryptographic utility This package is part of the OpenSSL project's implementation of the SSL and TLS cryptographic protocols for secure communication over the Internet. . It contains the general-purpose command line binary /usr/bin/openssl, useful for cryptographic operations such as: * creating RSA, DH, and DSA key parameters; * creating X.509 certificates, CSRs, and CRLs; * calculating message digests; * encrypting and decrypting with ciphers; * testing SSL/TLS clients and servers; * handling S/MIME signed or encrypted mail. Package: wget Status: install ok installed Priority: important Section: web Installed-Size: 1725 Maintainer: Noël Köthe Architecture: amd64 Multi-Arch: foreign Version: 1.16-1 Depends: libc6 (>= 2.17), libgnutls-deb0-28 (>= 3.3.0), libidn11 (>= 1.13), libnettle4, libpsl0 (>= 0.4.0), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4) Recommends: ca-certificates Conflicts: wget-ssl Conffiles: /etc/wgetrc 618c05b4106ad20141dcf6deada2e87f Description: retrieves files from the web Wget is a network utility to retrieve files from the web using HTTP(S) and FTP, the two most widely used internet protocols. It works non-interactively, so it will work in the background, after having logged off. The program supports recursive retrieval of web-authoring pages as well as FTP sites -- you can use Wget to make mirrors of archives and home pages or to travel the web like a WWW robot. . Wget works particularly well with slow or unstable connections by continuing to retrieve a document until the document is fully downloaded. Re-getting files from where it left off works on servers (both HTTP and FTP) that support it. Both HTTP and FTP retrievals can be time stamped, so Wget can see if the remote file has changed since the last retrieval and automatically retrieve the new version if it has. . Wget supports proxy servers; this can lighten the network load, speed up retrieval, and provide access behind firewalls. Homepage: http://www.gnu.org/software/wget/ Package: python-virtualenv Status: install ok installed Priority: optional Section: python Installed-Size: 182 Maintainer: Debian Python Modules Team Architecture: all Version: 1.11.6+ds-1 Depends: python, python-pip-whl, python-pkg-resources, python-setuptools-whl Recommends: virtualenv Description: Python virtual environment creator The virtualenv utility creates virtual Python instances, each invokable with its own Python executable. Each instance can have different sets of modules, installable via easy_install. Virtual Python instances can also be created without root access. . This is the Python 2 version of the library. Homepage: http://pypi.python.org/pypi/virtualenv Package: libterm-ui-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 79 Maintainer: Debian Perl Group Architecture: all Version: 0.42-1 Depends: perl, liblog-message-simple-perl | perl (<< 5.17) Description: Term::ReadLine UI made easy Term::UI is a transparent way of eliminating the overhead of having to format a question and then validate the reply, informing the user if the answer was not proper and re-issuing the question. . Simply give it the question you want to ask, optionally with choices the user can pick from and a default and Term::UI will DWYM. . For asking a yes or no question, there's even a shortcut. Homepage: https://metacpan.org/release/Term-UI/ Package: vim-common Status: install ok installed Priority: important Section: editors Installed-Size: 404 Maintainer: Debian Vim Maintainers Architecture: amd64 Source: vim Version: 2:7.4.488-7 Replaces: vim-gui-common (<< 2:7.4.488-4~) Depends: libc6 (>= 2.3.4) Recommends: vim | vim-gnome | vim-gtk | vim-athena | vim-nox | vim-tiny Breaks: vim-gui-common (<< 2:7.4.488-4~) Conffiles: /etc/vim/vimrc 5fd31a932a5738dd87418b1b201dcf7c Description: Vi IMproved - Common files Vim is an almost compatible version of the UNIX editor Vi. . Many new features have been added: multi level undo, syntax highlighting, command line history, on-line help, filename completion, block operations, folding, Unicode support, etc. . This package contains files shared by all non GUI-enabled vim variants (vim and vim-tiny currently) available in Debian. Examples of such shared files are: manpages, common executables like xxd, and configuration files. Homepage: http://www.vim.org/ Package: libcgi-pm-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 526 Maintainer: Debian Perl Group Architecture: all Version: 4.09-1 Depends: perl Recommends: libcgi-fast-perl (>= 1:2.01) Breaks: libcgi-fast-perl (<< 1:2) Description: module for Common Gateway Interface applications CGI.pm is a Perl module that provides classes useful for creating Web forms and for parsing their contents. It defines CGI objects, entities that contain the values of the current query string and other state variables. Homepage: https://metacpan.org/release/CGI Package: apt-listchanges Status: install ok installed Priority: standard Section: utils Installed-Size: 446 Maintainer: Sandro Tosi Architecture: all Version: 2.85.13+nmu1 Depends: python (>= 2.4), python-support (>= 0.90.0), apt (>= 0.5.3), python-apt (>= 0.7.93), ucf (>= 0.28), debianutils (>= 2.0.2), debconf (>= 0.5) | debconf-2.0 Suggests: x-terminal-emulator, www-browser, python-glade2, python-gtk2, default-mta | mail-transport-agent Conffiles: /etc/apt/apt.conf.d/20listchanges 39204938ee32c5ebd503167ace5c1d0c Description: package change history notification tool The tool apt-listchanges can compare a new version of a package with the one currently installed and show what has been changed, by extracting the relevant entries from the Debian changelog and NEWS files. . It can be run on several .deb archives at a time to get a list of all changes that would be caused by installing or upgrading a group of packages. When configured as an APT plugin it will do this automatically during upgrades. Package: libonig2 Status: install ok installed Priority: optional Section: libs Installed-Size: 462 Maintainer: Jörg Frings-Fürst Architecture: amd64 Multi-Arch: same Source: libonig Version: 5.9.5-3.2 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: Oniguruma regular expressions library The characteristics of this library is that different character encoding for every regular expression object can be specified. Homepage: http://www.geocities.jp/kosako3/oniguruma/ Package: libopts25 Status: install ok installed Priority: optional Section: libs Installed-Size: 184 Maintainer: Andreas Metzler Architecture: amd64 Multi-Arch: same Source: autogen Version: 1:5.18.4-3 Replaces: autogen Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: automated option processing library based on autogen This package contains the shared libraries needed by binaries that use autoopts for option processing. The package containing the header files and static libraries is libopts25-dev. The package containing the development tools is autogen. Homepage: http://www.gnu.org/software/autogen/ Package: liblwres90 Status: install ok installed Priority: standard Section: libs Installed-Size: 132 Maintainer: LaMont Jones Architecture: amd64 Source: bind9 Version: 1:9.9.5.dfsg-9+deb8u3 Replaces: libbind0 Depends: libc6 (>= 2.15), libcap2 (>= 1:2.10), libxml2 (>= 2.6.27) Conflicts: libbind0 Description: Lightweight Resolver Library used by BIND The Berkeley Internet Name Domain (BIND) implements an Internet domain name server. BIND is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package delivers the liblwres shared library used by BIND's daemons and clients. Package: unattended-upgrades Status: install ok installed Priority: optional Section: admin Installed-Size: 355 Maintainer: Michael Vogt Architecture: all Version: 0.83.3.2+deb8u1 Depends: debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~), debconf, python3, python3-apt, apt-utils, apt, ucf, lsb-release, lsb-base (>= 3.2-14), xz-utils Suggests: bsd-mailx, mail-transport-agent Conffiles: /etc/apt/apt.conf.d/50unattended-upgrades f7420d9b010fac1517e15cfac840f815 /etc/init.d/unattended-upgrades 4f525a4e44bc36d79931eb1794fd0518 /etc/kernel/postinst.d/unattended-upgrades b74a4f1a1fe2e350aec97f472c25e0bb /etc/logrotate.d/unattended-upgrades e45049ee847f069a99e3e6ec39155d4a /etc/pm/sleep.d/10_unattended-upgrades-hibernate d4ebdc2a2fdfeea33e6cd39812a85c3a Description: automatic installation of security upgrades This package can download and install security upgrades automatically and unattended, taking care to only install packages from the configured APT source, and checking for dpkg prompts about configuration file changes. . This script is the backend for the APT::Periodic::Unattended-Upgrade option. Package: libsqlite3-0 Status: install ok installed Priority: standard Section: libs Installed-Size: 877 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: same Source: sqlite3 Version: 3.8.7.1-1+deb8u1 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: SQLite 3 shared library SQLite is a C library that implements an SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process. Homepage: http://www.sqlite.org/ Package: libhtml-form-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 89 Maintainer: Debian Perl Group Architecture: all Version: 6.03-1 Replaces: libwww-perl (<< 6.00) Depends: perl, libhtml-parser-perl, libhttp-message-perl, liburi-perl Breaks: libwww-perl (<< 6.00) Description: module that represents an HTML form element Objects of the HTML::Form class represents a single HTML
...
instance. A form consists of a sequence of inputs that usually have names, and which can take on various values. The state of a form can be tweaked and it can then be asked to provide HTTP::Request objects that can be passed to the request() method of LWP::UserAgent. Homepage: http://search.cpan.org/dist/HTML-Form/ Package: libfile-listing-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 56 Maintainer: Debian Perl Group Architecture: all Version: 6.04-1 Replaces: libwww-perl (<< 6.00) Depends: perl, libhttp-date-perl Breaks: libwww-perl (<< 6.00) Description: module to parse directory listings File::Listing exports a single function called parse_dir(), which can be used to parse directory listings. . The first parameter to parse_dir() is the directory listing to parse. It can be a scalar, a reference to an array of directory lines or a glob representing a filehandle to read the directory listing from. . The second parameter is the time zone to use when parsing time stamps in the listing. If this value is undefined, then the local time zone is assumed. . The third parameter is the type of listing to assume. Currently supported formats are 'unix', 'apache' and 'dosftp'. The default value 'unix'. Homepage: http://search.cpan.org/dist/File-Listing/ Package: sysv-rc Status: install ok installed Priority: required Section: admin Installed-Size: 125 Maintainer: Debian sysvinit maintainers Architecture: all Multi-Arch: foreign Source: sysvinit Version: 2.88dsf-59 Replaces: file-rc Depends: debconf (>= 0.5) | debconf-2.0, sysvinit-utils (>= 2.86.ds1-62), insserv (>> 1.12.0-10), startpar Recommends: lsb-base (>= 3.2-14) Suggests: bum Breaks: initscripts (<< 2.86.ds1-63) Conflicts: file-rc Description: System-V-like runlevel change mechanism This package provides support for the System-V like system for booting, changing runlevels, and shutting down, configured through symbolic links in /etc/rc?.d/. Homepage: http://savannah.nongnu.org/projects/sysvinit Package: libudev0 Status: install ok installed Priority: important Section: libs Installed-Size: 158 Maintainer: Marco d'Itri Architecture: amd64 Multi-Arch: same Source: udev Version: 175-7.2 Depends: libc6 (>= 2.8) Pre-Depends: multiarch-support Description: libudev shared library This library provides access to udev device information. Package: python-gamin Status: install ok installed Priority: optional Section: python Installed-Size: 55 Maintainer: Michael Banck Architecture: amd64 Source: gamin Version: 0.1.10-4.1 Replaces: python2.3-gamin Provides: python2.6-gamin, python2.7-gamin Depends: libc6 (>= 2.4), libgamin0, python (<< 2.8), python (>= 2.6), python-support (>= 0.90.0) Conflicts: python2.3-gamin Description: Python binding for the gamin client library Gamin is a file and directory monitoring system defined to be a subset of the FAM (File Alteration Monitor) system. . This package contains the Python bindings for the gamin client library. Python-Version: 2.6, 2.7 Package: php-apc Status: install ok installed Priority: extra Section: oldlibs Installed-Size: 30 Maintainer: Debian PHP PECL Maintainers Architecture: all Source: php-apcu Version: 4.0.7-1 Depends: php5-apcu Conffiles: /etc/php5/mods-available/apc.ini 6f9733de9436736fbbe6f967f9224e4f obsolete Description: APC User Cache for PHP 5 (transitional package) This is a dummy transition package that can be safely removed once no package depend on it. Homepage: http://pecl.php.net/package/APCu Package: tasksel-data Status: install ok installed Priority: important Section: admin Installed-Size: 551 Maintainer: Debian Install System Team Architecture: all Source: tasksel Version: 3.31+deb8u1 Depends: tasksel (= 3.31+deb8u1) Recommends: laptop-detect Conflicts: tasksel (<< 2.67) Description: official tasks used for installation of Debian systems This package contains data about the standard tasks available on a Debian system. Package: apt Status: install ok installed Priority: important Section: admin Installed-Size: 3789 Maintainer: APT Development Team Architecture: amd64 Version: 1.0.9.8.1 Replaces: manpages-it (<< 2.80-4~), manpages-pl (<< 20060617-3~), openjdk-6-jdk (<< 6b24-1.11-0ubuntu1~), sun-java5-jdk (>> 0), sun-java6-jdk (>> 0) Depends: libapt-pkg4.12 (>= 1.0.9.8.1), libc6 (>= 2.15), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.9), debian-archive-keyring, gnupg Suggests: aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), apt-doc, python-apt Breaks: manpages-it (<< 2.80-4~), manpages-pl (<< 20060617-3~), openjdk-6-jdk (<< 6b24-1.11-0ubuntu1~), sun-java5-jdk (>> 0), sun-java6-jdk (>> 0) Conflicts: python-apt (<< 0.7.93.2~) Conffiles: /etc/apt/apt.conf.d/01autoremove 5bf3e7bfa3bec23d634c9f3652da1787 /etc/cron.daily/apt 4f33a76ad3e46913db2be02f0b587933 /etc/kernel/postinst.d/apt-auto-removal 5d7236fb0c051eec2f5156b641fc447b /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3 Description: commandline package manager This package provides commandline tools for searching and managing as well as querying information about packages as a low-level access to all features of the libapt-pkg library. . These include: * apt-get for retrieval of packages and information about them from authenticated sources and for installation, upgrade and removal of packages together with their dependencies * apt-cache for querying available information about installed as well as installable packages * apt-cdrom to use removable media as a source for packages * apt-config as an interface to the configuration settings * apt-key as an interface to manage authentication keys Package: libfribidi0 Status: install ok installed Priority: optional Section: libs Installed-Size: 125 Maintainer: Debian Hebrew Packaging Team Architecture: amd64 Multi-Arch: same Source: fribidi Version: 0.19.6-3 Depends: libc6 (>= 2.3.4) Pre-Depends: multiarch-support Description: Free Implementation of the Unicode BiDi algorithm FriBiDi is a BiDi algorithm implementation for Hebrew and/or Arabic languages. This package contains the shared libraries. Homepage: http://www.fribidi.org/ Package: liblocale-gettext-perl Status: install ok installed Priority: required Section: perl Installed-Size: 37 Maintainer: Debian Perl Group Architecture: amd64 Source: liblocale-gettext-perl (1.05-8) Version: 1.05-8+b1 Depends: libc6 (>= 2.2.5) Pre-Depends: perl-base (>= 5.20.0-4), perlapi-5.20.0 Description: module using libc functions for internationalization in Perl The gettext module permits access from perl to the gettext() family of functions for retrieving message strings from databases constructed to internationalize software. . It provides gettext(), dgettext(), dcgettext(), textdomain(), bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext() and dngettext(). Homepage: https://metacpan.org/release/gettext Package: libmpfr4 Status: install ok installed Priority: optional Section: libs Installed-Size: 789 Maintainer: Debian QA Group Architecture: amd64 Multi-Arch: same Source: mpfr4 Version: 3.1.2-2 Depends: libc6 (>= 2.14), libgmp10 Pre-Depends: multiarch-support Conflicts: libgmp3 (<< 4.1.4-3) Description: multiple precision floating-point computation MPFR provides a library for multiple-precision floating-point computation with correct rounding. The computation is both efficient and has a well-defined semantics. It copies the good ideas from the ANSI/IEEE-754 standard for double-precision floating-point arithmetic (53-bit mantissa). Homepage: http://www.mpfr.org/ Package: dmsetup Status: install ok installed Priority: optional Section: admin Installed-Size: 123 Maintainer: Debian LVM Team Architecture: amd64 Multi-Arch: foreign Source: lvm2 (2.02.111-2.2) Version: 2:1.02.90-2.2 Depends: libc6 (>= 2.14), libdevmapper1.02.1 (>= 2:1.02.90), util-linux (>> 2.16) Conflicts: devicekit-disks (<< 009) Description: Linux Kernel Device Mapper userspace library The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management) Team's implementation of a minimalistic kernel-space driver that handles volume management, while keeping knowledge of the underlying device layout in user-space. This makes it useful for not only LVM, but EVMS, software raid, and other drivers that create "virtual" block devices. . This package contains a utility for modifying device mappings. Homepage: http://sources.redhat.com/lvm2/ Package: libxpm4 Status: install ok installed Priority: optional Section: libs Installed-Size: 123 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxpm (1:3.5.11-1) Version: 1:3.5.11-1+b1 Depends: libc6 (>= 2.14), libx11-6 Pre-Depends: multiarch-support Description: X11 pixmap library libXpm provides support and common operation for the XPM pixmap format, which is commonly used in legacy X applications. XPM is an extension of the monochrome XBM bitmap specified in the X protocol. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXpm Package: pciutils Status: install ok installed Priority: standard Section: admin Installed-Size: 1069 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Multi-Arch: foreign Version: 1:3.2.1-3 Depends: libc6 (>= 2.14), libpci3 (= 1:3.2.1-3) Suggests: bzip2, wget | curl | lynx-cur Description: Linux PCI Utilities This package contains various utilities for inspecting and setting of devices connected to the PCI bus. Homepage: http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml Package: iotop Status: install ok installed Priority: optional Section: admin Installed-Size: 132 Maintainer: Paul Wise Architecture: amd64 Version: 0.6-1 Depends: python (>= 2.7), python (<< 2.8) Description: simple top-like I/O monitor iotop does for I/O usage what top(1) does for CPU usage. It watches I/O usage information output by the Linux kernel and displays a table of current I/O usage by processes on the system. It is handy for answering the question "Why is the disk churning so much?". . iotop can only run under a Linux 2.6.20 or later kernel built with the CONFIG_TASKSTATS, CONFIG_TASK_DELAY_ACCT, CONFIG_TASK_IO_ACCOUNTING and CONFIG_VM_EVENT_COUNTERS build config options on. Homepage: http://guichaz.free.fr/iotop/ Package: diffutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 950 Maintainer: Santiago Vila Architecture: amd64 Source: diffutils (1:3.3-1) Version: 1:3.3-1+b1 Replaces: diff Pre-Depends: libc6 (>= 2.17) Suggests: diffutils-doc, wdiff Description: File comparison utilities The diffutils package provides the diff, diff3, sdiff, and cmp programs. . `diff' shows differences between two files, or each corresponding file in two directories. `cmp' shows the offsets and line numbers where two files differ. `cmp' can also show all the characters that differ between the two files, side by side. `diff3' shows differences among three files. `sdiff' merges two files interactively. . The set of differences produced by `diff' can be used to distribute updates to text files (such as program source code) to other people. This method is especially useful when the differences are small compared to the complete files. Given `diff' output, the `patch' program can update, or "patch", a copy of the file. Homepage: http://www.gnu.org/software/diffutils/ Package: liblog-message-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 88 Maintainer: Debian Perl Group Architecture: all Version: 0.8-1 Depends: perl Description: powerful and flexible message logging mechanism Log::Message is a generic message storage mechanism. It allows you to store messages on a stack -- either shared or private -- and assign meta-data to it. Some meta-data will automatically be added for you, like a timestamp and a stack trace, but some can be filled in by the user, like a tag by which to identify it or group it, and a level at which to handle the message (for example, log it, or die with it) . Log::Message also provides a powerful way of searching through items by regexes on messages, tags and level. Homepage: https://metacpan.org/release/Log-Message/ Package: libcloog-isl4 Status: install ok installed Priority: optional Section: libs Installed-Size: 204 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: cloog (0.18.2-1) Version: 0.18.2-1+b2 Depends: libc6 (>= 2.14), libgmp10, libisl10 (>= 0.11) Pre-Depends: multiarch-support Description: Chunky Loop Generator (runtime library) CLooG is a software which generates loops for scanning Z-polyhedra. . This package contains the runtime library. Homepage: http://www.CLooG.org Package: python-distlib-whl Status: install ok installed Priority: optional Section: python Installed-Size: 175 Maintainer: Matthias Klose Architecture: all Source: distlib Version: 0.1.9-1 Description: low-level components of python distutils2/packaging Distlib is a library which implements low-level functions that relate to packaging and distribution of Python software. It is intended to be used as the basis for third-party packaging tools. . This package provides the universal wheel. Homepage: https://pypi.python.org/pypi/distlib Package: libsensors4 Status: install ok installed Priority: optional Section: libs Installed-Size: 99 Maintainer: Aurelien Jarno Architecture: amd64 Multi-Arch: same Source: lm-sensors Version: 1:3.3.5-2 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Suggests: lm-sensors Conffiles: /etc/sensors.d/.placeholder d41d8cd98f00b204e9800998ecf8427e /etc/sensors3.conf a65e81e55558941ce0f3080b9333e18f Description: library to read temperature/voltage/fan sensors Lm-sensors is a hardware health monitoring package for Linux. It allows you to access information from temperature, voltage, and fan speed sensors. It works with most newer systems. . This package contains a shared library for querying lm-sensors. Homepage: http://www.lm-sensors.org Package: man-db Status: install ok installed Priority: important Section: doc Installed-Size: 2514 Maintainer: Colin Watson Architecture: amd64 Multi-Arch: foreign Version: 2.7.0.2-5 Replaces: man, manpages-de (<< 0.5-4), manpages-zh (<< 1.5.2-1.1), nlsutils Provides: man, man-browser Depends: groff-base (>= 1.18.1.1-15), bsdmainutils, debconf (>= 1.2.0) | debconf-2.0, libc6 (>= 2.17), libgdbm3 (>= 1.8.3), libpipeline1 (>= 1.3.0), zlib1g (>= 1:1.1.4) Pre-Depends: dpkg (>= 1.16.1~) Suggests: groff, less, www-browser Breaks: manpages-zh (<< 1.5.2-1.1) Conflicts: man, suidmanager (<< 0.50) Conffiles: /etc/cron.daily/man-db e467745743809f974051c3ec5b9cd022 /etc/cron.weekly/man-db 9527d2000fb1f221dbcecb75467a3e49 /etc/manpath.config 167675fd93075fb5f6ce1aa5f56a8a22 Description: on-line manual pager This package provides the man command, the primary way of examining the on-line help files (manual pages). Other utilities provided include the whatis and apropos commands for searching the manual page database, the manpath utility for determining the manual page search path, and the maintenance utilities mandb, catman and zsoelim. man-db uses the groff suite of programs to format and display the manual pages. Homepage: http://man-db.nongnu.org/ Package: shared-mime-info Status: install ok installed Priority: optional Section: misc Installed-Size: 4396 Maintainer: Sebastian Dröge Architecture: amd64 Multi-Arch: foreign Version: 1.3-1 Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.35.9), libxml2 (>= 2.7.4) Conflicts: libglib2.0-0 (<< 2.17.2), libgnomevfs2-0 (<< 1:2.24.0), tracker (<< 0.6.90) Description: FreeDesktop.org shared MIME database and spec This is the shared MIME-info database from the X Desktop Group. It is required by any program complying to the Shared MIME-Info Database spec, which is also included in this package. . At this time at least ROX, GNOME, KDE and XFCE use this database. Homepage: http://freedesktop.org/wiki/Software/shared-mime-info Package: libhttp-message-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 206 Maintainer: Debian Perl Group Architecture: all Version: 6.06-1 Replaces: libwww-perl (<< 6.00) Depends: perl, libencode-locale-perl, libhttp-date-perl, libio-html-perl, liblwp-mediatypes-perl, liburi-perl, perl (>= 5.11) | libio-compress-perl Breaks: libwww-perl (<< 6.00) Description: perl interface to HTTP style messages The HTTP::Headers class encapsulates HTTP-style message headers. The headers consist of attribute-value pairs also called fields, which may be repeated, and which are printed in a particular order. The field names are cases insensitive. . Instances of this class are usually created as member variables of the HTTP::Request and HTTP::Response classes, internal to the library. Homepage: https://metacpan.org/release/HTTP-Message/ Package: libnet-http-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 89 Maintainer: Debian Perl Group Architecture: all Version: 6.07-1 Replaces: libwww-perl (<< 6.00) Depends: perl, libio-socket-ip-perl | perl (>= 5.19.8) | libio-socket-inet6-perl, liburi-perl Recommends: libio-socket-ssl-perl (>= 1.38) Breaks: libwww-perl (<< 6.00) Description: module providing low-level HTTP connection client The Net::HTTP class is a low-level HTTP client. An instance of the Net::HTTP class represents a connection to an HTTP server. The HTTP protocol is described in RFC 2616. The Net::HTTP class supports HTTP/1.0 and HTTP/1.1. Net::HTTP is a sub-class of IO::Socket::INET. You can mix its methods with reading and writing from the socket directly. This is not necessarily a good idea, unless you know what you are doing. Homepage: https://metacpan.org/release/Net-HTTP Package: libnfnetlink0 Status: install ok installed Priority: extra Section: libs Installed-Size: 61 Maintainer: Alexander Wirt Architecture: amd64 Multi-Arch: same Source: libnfnetlink Version: 1.0.1-3 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: Netfilter netlink library libnfnetlink is the low-level library for netfilter related kernel/userspace communication. It provides a generic messaging infrastructure for in-kernel netfilter subsystems (such as nfnetlink_log, nfnetlink_queue, nfnetlink_conntrack) and their respective users and/or management tools in userspace. Package: vim-runtime Status: install ok installed Priority: optional Section: editors Installed-Size: 25557 Maintainer: Debian Vim Maintainers Architecture: all Source: vim Version: 2:7.4.488-7 Recommends: vim | vim-gnome | vim-gtk | vim-athena | vim-nox | vim-tiny Breaks: vim-tiny (<< 2:7.4.488-7) Enhances: vim-tiny Description: Vi IMproved - Runtime files Vim is an almost compatible version of the UNIX editor Vi. . Many new features have been added: multi level undo, syntax highlighting, command line history, on-line help, filename completion, block operations, folding, Unicode support, etc. . This package contains vimtutor and the architecture independent runtime files, used, if available, by all vim variants available in Debian. Example of such runtime files are: online documentation, rules for language-specific syntax highlighting and indentation, color schemes, and standard plugins. Homepage: http://www.vim.org/ Package: libpam-modules Status: install ok installed Priority: required Section: admin Installed-Size: 852 Maintainer: Steve Langasek Architecture: amd64 Multi-Arch: same Source: pam Version: 1.1.8-3.1 Replaces: libpam-umask, libpam0g-util Provides: libpam-mkhomedir, libpam-motd, libpam-umask Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.15), libdb5.3, libpam0g (>= 1.1.3-2), libselinux1 (>= 2.1.9), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.1.8-3.1) Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask Conffiles: /etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4 /etc/security/namespace.init b46b23d64860d1557d2a8f44b231fd54 /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36 /etc/security/limits.conf 11c27ba00b7bd6a255f33126f75c5005 /etc/security/namespace.conf 6424c99a62ddf4b7d3ca713bb06ded89 /etc/security/pam_env.conf ddee4a931170dc21b4e0b9bb28e02a7b /etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192 /etc/security/access.conf 13ec4d189f0ed9acf3433977a53d446b Description: Pluggable Authentication Modules for PAM This package completes the set of modules for PAM. It includes the pam_unix.so module as well as some specialty modules. Homepage: http://pam.sourceforge.net/ Package: libmpc3 Status: install ok installed Priority: extra Section: libs Installed-Size: 128 Maintainer: Laurent Fousse Architecture: amd64 Multi-Arch: same Source: mpclib3 Version: 1.0.2-1 Depends: libc6 (>= 2.3), libgmp10, libmpfr4 (>= 3.1.2) Pre-Depends: multiarch-support Description: multiple precision complex floating-point library MPC is a portable library written in C for arbitrary precision arithmetic on complex numbers providing correct rounding. For the time being, it contains all arithmetic operations over complex numbers, the exponential and the logarithm functions, the trigonometric and hyperbolic functions. . Ultimately, it should implement a multiprecision equivalent of the ISO C99 standard. . It builds upon the GNU MP and the MPFR libraries. Homepage: http://www.multiprecision.org/mpc/ Package: insserv Status: install ok installed Priority: optional Section: misc Installed-Size: 183 Maintainer: Petter Reinholdtsen Architecture: amd64 Version: 1.14.0-5 Depends: libc6 (>= 2.7) Suggests: bootchart2 Breaks: sysv-rc (<< 2.87dsf-3) Conffiles: /etc/bash_completion.d/insserv 32975fe14795d6fce1408d5fd22747fd /etc/insserv.conf b15785c0c4b022a3ba0edb78ba71297c Description: boot sequence organizer using LSB init.d script dependency information The insserv program is used by the standard SysV-based init system. It updates the order of symlinks in /etc/rc?.d/ based on dependencies specified by LSB headers in the init.d scripts themselves. . These declared relations between scripts make it possible to optimize the boot sequence for the currently installed set of packages, while detecting and rejecting dependency loops. . Using insserv incorrectly can result in an unbootable system. Homepage: http://savannah.nongnu.org/projects/sysvinit Package: libgamin0 Status: install ok installed Priority: optional Section: libs Installed-Size: 88 Maintainer: Michael Banck Architecture: amd64 Source: gamin Version: 0.1.10-4.1 Replaces: libfam0, libfam0c102 Provides: libfam0, libfam0c102 Depends: libc6 (>= 2.4), gamin Conflicts: libfam0, libfam0c102 Description: Client library for the gamin file and directory monitoring system Gamin is a file and directory monitoring system defined to be a subset of the FAM (File Alteration Monitor) system. . This package contains the client library for the gamin file and directory monitoring system. Package: libstdc++6 Status: install ok installed Priority: important Section: libs Installed-Size: 1319 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-4.9 Version: 4.9.2-10 Replaces: libstdc++6-4.9-dbg (<< 4.9.0-3) Depends: gcc-4.9-base (= 4.9.2-10), libc6 (>= 2.18), libgcc1 (>= 1:4.1.1) Pre-Depends: multiarch-support Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2) Conflicts: scim (<< 1.4.2-1) Description: GNU Standard C++ Library v3 This package contains an additional runtime library for C++ programs built with the GNU compiler. . libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which was included up to g++-2.95. The first version of libstdc++-v3 appeared in g++-3.0. Homepage: http://gcc.gnu.org/ Package: libkrb5-3 Status: install ok installed Priority: standard Section: libs Installed-Size: 972 Maintainer: Sam Hartman Architecture: amd64 Multi-Arch: same Source: krb5 Version: 1.12.1+dfsg-19+deb8u1 Depends: libc6 (>= 2.16), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.9+dfsg~beta1), libkeyutils1 (>= 1.5.9), libkrb5support0 (= 1.12.1+dfsg-19+deb8u1) Pre-Depends: multiarch-support Recommends: krb5-locales Suggests: krb5-doc, krb5-user Breaks: libsmbclient (<= 2:3.6.1-2), sssd (<= 1.2.1-4.3) Conflicts: libkrb53 Description: MIT Kerberos runtime libraries Kerberos is a system for authenticating users and services on a network. Kerberos is a trusted third-party service. That means that there is a third party (the Kerberos server) that is trusted by all the entities on the network (users and services, usually called "principals"). . This is the MIT reference implementation of Kerberos V5. . This package contains the runtime library for the main Kerberos v5 API used by applications and Kerberos clients. Homepage: http://web.mit.edu/kerberos/ Package: gcc-4.9-base Status: install ok installed Priority: required Section: libs Installed-Size: 218 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-4.9 Version: 4.9.2-10 Breaks: dehydra (<= 0.9.hg20110609-2), gcc-4.4-base (<< 4.4.7), gcc-4.7-base (<< 4.7.3), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~) Description: GCC, the GNU Compiler Collection (base package) This package contains files common to all languages and libraries contained in the GNU Compiler Collection (GCC). Homepage: http://gcc.gnu.org/ Package: python-colorama-whl Status: install ok installed Priority: optional Section: python Installed-Size: 49 Maintainer: Khalid El Fathi Architecture: all Source: python-colorama Version: 0.3.2-1 Description: Cross-platform colored terminal text in Python - Wheels Python-colorama provides a simple cross-platform API to print colored terminal text from Python applications. . ANSI escape character sequences are commonly used to produce colored terminal text on Unix. Colorama provides some shortcuts to generate these sequences. . This has the happy side-effect that existing applications or libraries which already use ANSI sequences to produce colored output on Linux. . This package provides the universal wheels. Homepage: http://pypi.python.org/pypi/colorama/ Package: binutils Status: install ok installed Priority: optional Section: devel Installed-Size: 20566 Maintainer: Matthias Klose Architecture: amd64 Version: 2.25-5 Replaces: binutils-gold (<< 2.20.51.20100415), binutils-mingw-w64-i686 (<< 2.23.52.20130612-1+3), binutils-mingw-w64-x86-64 (<< 2.23.52.20130612-1+3) Provides: binutils-gold, elf-binutils Depends: libc6 (>= 2.14), zlib1g (>= 1:1.2.0) Suggests: binutils-doc (>= 2.25-5) Breaks: binutils-mingw-w64-i686 (<< 2.23.52.20130612-1+3), binutils-mingw-w64-x86-64 (<< 2.23.52.20130612-1+3) Conflicts: binutils-gold (<< 2.20.51.20100415), binutils-mingw-w64-i686 (<< 2.23.52.20130612-1+3), binutils-mingw-w64-x86-64 (<< 2.23.52.20130612-1+3), elf-binutils, gas, modutils (<< 2.4.19-1) Description: GNU assembler, linker and binary utilities The programs in this package are used to assemble, link and manipulate binary and object files. They may be used in conjunction with a compiler and various libraries to build programs. Package: libffi6 Status: install ok installed Priority: optional Section: libs Installed-Size: 71 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: libffi (3.1-2) Version: 3.1-2+b2 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: Foreign Function Interface library runtime A foreign function interface is the popular name for the interface that allows code written in one language to call code written in another language. Package: libaudit-common Status: install ok installed Priority: optional Section: libs Installed-Size: 49 Maintainer: Laurent Bigonville Architecture: all Multi-Arch: foreign Source: audit Version: 1:2.4-1 Replaces: libaudit0, libaudit1 (<< 1:2.2.1-2) Breaks: libaudit0, libaudit1 (<< 1:2.2.1-2) Conffiles: /etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2 Description: Dynamic library for security auditing - common files The audit-libs package contains the dynamic libraries needed for applications to use the audit framework. It is used to monitor systems for security related events. . This package contains the libaudit.conf configuration file and the associated manpage. Homepage: http://people.redhat.com/sgrubb/audit/ Package: libtext-charwidth-perl Status: install ok installed Priority: required Section: perl Installed-Size: 85 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Source: libtext-charwidth-perl (0.04-7) Version: 0.04-7+b3 Depends: libc6 (>= 2.2.5), perl-base (>= 5.20.0-4), perlapi-5.20.0 Description: get display widths of characters on the terminal This module permits perl software to get the display widths of characters and strings on the terminal, using wcwidth() and wcswidth() from libc. . It provides mbwidth(), mbswidth(), and mblen(). Homepage: http://search.cpan.org/search?module=Text::CharWidth Package: liblua5.1-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 404 Maintainer: John V. Belmonte Architecture: amd64 Multi-Arch: same Source: lua5.1 Version: 5.1.5-7.1 Depends: libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1) Pre-Depends: multiarch-support Description: Shared library for the Lua interpreter version 5.1 Lua is a powerful, light-weight programming language designed for extending applications. The language engine is accessible as a library, having a C API which allows the application to exchange data with Lua programs and also to extend Lua with C functions. Lua is also used as a general-purpose, stand-alone language through the simple command line interpreter provided. . This package contains runtime libraries. You shouldn't need to install it explicitly. Homepage: http://www.lua.org Package: mysql-server-core-5.5 Status: install ok installed Priority: optional Section: database Installed-Size: 19323 Maintainer: Debian MySQL Maintainers Architecture: amd64 Source: mysql-5.5 Version: 5.5.46-0+deb8u1 Replaces: mysql-client-5.1, mysql-server-5.0, mysql-server-5.1, mysql-server-core-5.0, mysql-server-core-5.1, virtual-mysql-server-core Provides: mysql-server-core, virtual-mysql-server-core Depends: libaio1 (>= 0.3.93), libc6 (>= 2.17), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1), libwrap0 (>= 7.6-4~), zlib1g (>= 1:1.2.0) Breaks: mysql-client-5.1, mysql-server-5.0, mysql-server-5.1, mysql-server-core-5.1, virtual-mysql-server-core Description: MySQL database server binaries MySQL is a fast, stable and true multi-user, multi-threaded SQL database server. SQL (Structured Query Language) is the most popular database query language in the world. The main goals of MySQL are speed, robustness and ease of use. . This package includes the server binaries but doesn't contain all the infrastructure needed to setup system databases. Homepage: http://dev.mysql.com/ Package: texinfo Status: install ok installed Priority: optional Section: text Installed-Size: 3904 Maintainer: Debian TeX maintainers Architecture: amd64 Multi-Arch: foreign Version: 5.2.0.dfsg.1-6 Replaces: tetex-base (<< 1.0.2+20000804-9), tetex-bin (<< 3.0) Depends: libc6 (>= 2.14), libtext-unidecode-perl, libintl-perl, libxml-libxml-perl Suggests: texlive-base, texlive-latex-base, texlive-generic-recommended, texinfo-doc-nonfree Breaks: ja-trans (<= 0.7-3.1), tetex-base (<< 3.0), tetex-bin (<< 3.0) Conffiles: /etc/texmf/fmt.d/50cyrtexinfo.cnf aa280e2a121f027b3b866fcb537750a0 Description: Documentation system for on-line information and printed output Texinfo is a documentation system that uses a single source file to produce both on-line information and printed output. . Using Texinfo, you can create a printed document with the normal features of a book, including chapters, sections, cross references, and indices. From the same Texinfo source file, you can create a menu-driven, on-line Info file with nodes, menus, cross references, and indices. Package: screen Status: install ok installed Priority: optional Section: misc Installed-Size: 908 Maintainer: Axel Beckert Architecture: amd64 Version: 4.2.1-3+deb8u1 Depends: libc6 (>= 2.15), libpam0g (>= 0.99.7.1), libtinfo5 Suggests: iselect (>= 1.4.0-1) | screenie | byobu Conffiles: /etc/init.d/screen-cleanup c1dc791ae42e2ce284cd20aff93e8987 /etc/screenrc 12c245238eb8b653625bba27dc81df6a Description: terminal multiplexer with VT100/ANSI terminal emulation GNU Screen is a terminal multiplexer that runs several separate "screens" on a single physical character-based terminal. Each virtual terminal emulates a DEC VT100 plus several ANSI X3.64 and ISO 2022 functions. Screen sessions can be detached and resumed later on a different terminal. . Screen also supports a whole slew of other features, including configurable input and output translation, serial port support, configurable logging, and multi-user support. Homepage: http://savannah.gnu.org/projects/screen Package: libxml-libxml-perl Status: install ok installed Priority: optional Section: perl Installed-Size: 1045 Maintainer: Debian Perl Group Architecture: amd64 Version: 2.0116+dfsg-1+deb8u1 Depends: libc6 (>= 2.14), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4), perl (>= 5.20.2-2), perlapi-5.20.2, libxml-namespacesupport-perl, libxml-sax-perl Description: Perl interface to the libxml2 library XML::LibXML is a Perl interface to the GNOME libxml2 library, which provides interfaces for parsing and manipulating XML files. This module allows Perl programmers to make use of the highly capable validating XML parser and the high performance Document Object Model (DOM) implementation. Additionally, it supports using the XML Path Language (XPath) to find and extract information. Homepage: https://metacpan.org/release/XML-LibXML Package: libcomerr2 Status: install ok installed Priority: required Section: libs Installed-Size: 101 Maintainer: Theodore Y. Ts'o Architecture: amd64 Multi-Arch: same Source: e2fsprogs Version: 1.42.12-1.1 Replaces: e2fsprogs (<< 1.34-1) Provides: libcomerr-kth-compat Depends: libc6 (>= 2.17) Pre-Depends: multiarch-support Description: common error description library libcomerr is an attempt to present a common error-handling mechanism to manipulate the most common form of error code in a fashion that does not have the problems identified with mechanisms commonly in use. Homepage: http://e2fsprogs.sourceforge.net Package: findutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 1406 Maintainer: Andreas Metzler Architecture: amd64 Multi-Arch: foreign Source: findutils (4.4.2-9) Version: 4.4.2-9+b1 Pre-Depends: libc6 (>= 2.17) Suggests: mlocate | locate Description: utilities for finding files--find, xargs GNU findutils provides utilities to find files meeting specified criteria and perform various actions on the files which are found. This package contains 'find' and 'xargs'; however, 'locate' has been split off into a separate package. Homepage: http://savannah.gnu.org/projects/findutils/ Package: libpam0g Status: install ok installed Priority: required Section: libs Installed-Size: 248 Maintainer: Steve Langasek Architecture: amd64 Multi-Arch: same Source: pam Version: 1.1.8-3.1 Replaces: libpam0g-util Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0 Pre-Depends: multiarch-support Suggests: libpam-doc Description: Pluggable Authentication Modules library Contains the shared library for Linux-PAM, a library that enables the local system administrator to choose how applications authenticate users. In other words, without rewriting or recompiling a PAM-aware application, it is possible to switch between the authentication mechanism(s) it uses. One may entirely upgrade the local authentication system without touching the applications themselves. Homepage: http://pam.sourceforge.net/ Package: libxdmcp6 Status: install ok installed Priority: optional Section: libs Installed-Size: 38 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxdmcp (1:1.1.1-1) Version: 1:1.1.1-1+b1 Depends: libc6 (>= 2.2.5) Pre-Depends: multiarch-support Description: X11 Display Manager Control Protocol library This package provides the main interface to the X11 display manager control protocol library, which allows for remote logins to display managers. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXdmcp Package: xml-core Status: install ok installed Priority: optional Section: text Installed-Size: 188 Maintainer: Debian XML/SGML Group Architecture: all Version: 0.13+nmu2 Depends: sgml-base (>= 1.26+nmu2), sed (>= 4.1.2-8) Suggests: debhelper (>= 9.20120909) Conffiles: /etc/sgml/xml-core.cat 055ba0bd3154c0a58b9bf8a0c9ecf2fa Description: XML infrastructure and XML catalog file support This package creates the XML infrastructure directories and provides XML catalog file support in compliance with the current Debian XML Policy draft: . * infrastructure directories: - /etc/xml - /usr/share/xml/{declaration,entities,misc,schema} - /usr/local/share/xml/{declaration,entities,misc,schema} . * XML catalog schema: OASIS XML Catalog Committee Specification 1.0 . * update-xmlcatalog(8): tool for maintaining the root XML catalog file and the package XML catalog files in the '/etc/xml' directory as well as local XML catalog files. . * dh_installxmlcatalogs(1): debhelper tool for installing local XML catalog files and registering XML entities in package XML catalog files and the root XML catalog file (requires debhelper package) Package: javascript-common Status: install ok installed Priority: optional Section: web Installed-Size: 68 Maintainer: Debian Javascript Maintainers Architecture: all Version: 11 Suggests: apache2 (>= 2.4.6~) | lighttpd | httpd Conffiles: /etc/apache2/conf-available/javascript-common.conf 133aafb01e900b05e75042fd47dec067 /etc/lighttpd/conf-available/90-javascript-alias.conf 568434a47d89bb89ecf81c8f9c4e1669 Description: Base support for JavaScript library packages Web applications that use JavaScript need to distribute it through HTTP. Using a common path for every script avoids the need to enable this path in the HTTP server for every package. . This is a helper package that creates /usr/share/javascript and enables it in the Apache and Lighttpd webserver. Package: libcap-ng0 Status: install ok installed Priority: optional Section: libs Installed-Size: 59 Maintainer: Pierre Chifflier Architecture: amd64 Multi-Arch: same Source: libcap-ng Version: 0.7.4-2 Depends: libc6 (>= 2.8) Pre-Depends: multiarch-support Description: An alternate POSIX capabilities library This library implements the user-space interfaces to the POSIX 1003.1e capabilities available in Linux kernels. These capabilities are a partitioning of the all powerful root privilege into a set of distinct privileges. . The libcap-ng library is intended to make programming with POSIX capabilities much easier than the traditional libcap library. . This package contains header files and libraries for libcap-ng. Homepage: http://people.redhat.com/sgrubb/libcap-ng Package: dbus Status: install ok installed Priority: standard Section: admin Installed-Size: 882 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: foreign Version: 1.8.20-0+deb8u1 Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.17), libcap-ng0, libdbus-1-3 (>= 1.7.6), libexpat1 (>= 2.0.1), libselinux1 (>= 2.0.65), libsystemd0, adduser, lsb-base (>= 3.2-14) Suggests: dbus-x11 Conffiles: /etc/dbus-1/session.conf b96c3a72dbcf8d8019f8d9b3b0c1b743 /etc/dbus-1/system.conf cc9caaf3b2f4a11f188bf81f0e59eabb /etc/default/dbus 0d0f25a2f993509c857eb262f6e22015 /etc/init.d/dbus ec9a7d183ec50837a12aca3f9c95cc27 Description: simple interprocess messaging system (daemon and utilities) D-Bus is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . D-Bus supports broadcast messages, asynchronous messages (thus decreasing latency), authentication, and more. It is designed to be low-overhead; messages are sent using a binary protocol, not using XML. D-Bus also supports a method call mapping for its messages, but it is not required; this makes using the system quite simple. . It comes with several bindings, including GLib, Python, Qt and Java. . This package contains the D-Bus daemon and related utilities. . The client-side library can be found in the libdbus-1-3 package, as it is no longer contained in this package. Homepage: http://dbus.freedesktop.org/ Package: libmount1 Status: install ok installed Priority: required Section: libs Installed-Size: 357 Maintainer: Debian util-linux Maintainers Architecture: amd64 Multi-Arch: same Source: util-linux Version: 2.25.2-6 Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libselinux1 (>= 1.32) Pre-Depends: multiarch-support Description: device mounting library The device mounting library, used by mount and umount helpers. Package: wamerican Status: install ok installed Priority: standard Section: text Installed-Size: 990 Maintainer: Don Armstrong Architecture: all Source: scowl Version: 7.1-1 Provides: wordlist Depends: debconf (>= 0.5) | debconf-2.0 Description: American English dictionary words for /usr/share/dict This package provides the file /usr/share/dict/american-english containing a list of English words with American spellings. This list can be used by spelling checkers, and by programs such as look(1). . There are also -small, -large, and -huge versions of this word list, and there are wbritish* and wcanadian* packages as well. Homepage: http://wordlist.sourceforge.net/ Package: libkeyutils1 Status: install ok installed Priority: standard Section: libs Installed-Size: 55 Maintainer: Christian Kastner Architecture: amd64 Multi-Arch: same Source: keyutils (1.5.9-5) Version: 1.5.9-5+b1 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: Linux Key Management Utilities (library) Keyutils is a set of utilities for managing the key retention facility in the kernel, which can be used by filesystems, block devices and more to gain and retain the authorization and encryption keys required to perform secure operations. . This package provides a wrapper library for the key management facility system calls. Homepage: http://people.redhat.com/~dhowells/keyutils/ Package: libnewt0.52 Status: install ok installed Priority: important Section: libs Installed-Size: 171 Maintainer: Alastair McKinstry Architecture: amd64 Multi-Arch: same Source: newt (0.52.17-1) Version: 0.52.17-1+b1 Depends: libc6 (>= 2.15), libslang2 (>= 2.2.4) Pre-Depends: multiarch-support Recommends: libfribidi0 Conffiles: /etc/newt/palette.original d41d8cd98f00b204e9800998ecf8427e Description: Not Erik's Windowing Toolkit - text mode windowing with slang Newt is a windowing toolkit for text mode built from the slang library. It allows color text mode applications to easily use stackable windows, push buttons, check boxes, radio buttons, lists, entry fields, labels, and displayable text. Scrollbars are supported, and forms may be nested to provide extra functionality. This package contains the shared library for programs that have been built with newt. Homepage: https://fedorahosted.org/newt/ Package: htop Status: install ok installed Priority: optional Section: utils Installed-Size: 204 Maintainer: Eugene V. Lyubimkin Architecture: amd64 Version: 1.0.3-1 Depends: libc6 (>= 2.15), libncursesw5 (>= 5.6+20070908), libtinfo5 Suggests: strace, ltrace Description: interactive processes viewer Htop is an ncursed-based process viewer similar to top, but it allows one to scroll the list vertically and horizontally to see all processes and their full command lines. . Tasks related to processes (killing, renicing) can be done without entering their PIDs. Homepage: http://hisham.hm/htop/ Package: bsdmainutils Status: install ok installed Priority: important Section: utils Installed-Size: 571 Maintainer: Debian Bsdmainutils Team Architecture: amd64 Multi-Arch: foreign Version: 9.0.6 Depends: libc6 (>= 2.14), libncurses5 (>= 5.5-5~), libtinfo5, bsdutils (>= 3.0-0), debianutils (>= 1.8) Suggests: cpp, wamerican | wordlist, whois, vacation Breaks: bsdutils (<< 1:2.13-11) Conffiles: /etc/calendar/default f499e79b0d2d685aa5ae7e1013940b96 /etc/cron.